Corsair
Corsair MP700 PRO 1TB with Air Cooler internal SSD
High-speed PCIe Gen5 NVMe 2.0 internal SSD with an active air cooler, delivering up to 12,400 MB/s read and 11,800 MB/s write
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory ComponentsHigh-density 3D TLC NAND
- InterfaceHigh-speed Gen5 PCIe x4 NVMe 2.0 M.2 interface
- Gen5 PCIe x4 interface delivers up to 12400MB/s reads for faster load times
- Active air cooler keeps temperatures low during sustained workloads
- High-density 3D TLC NAND provides 1TB capacity with 700TBW endurance
- DirectStorage compatible for reduced CPU overhead in supported games
- Compact M.2 2280 form factor fits standard motherboard slots
Capacity and interface
The Corsair MP700 PRO is a 1TB internal SSD built on an M.2 2280 form factor with a PCIe Gen5 x4 NVMe 2.0 interface. It includes an active air cooler attached to the drive. High-density 3D TLC NAND provides the storage media. The drive is designed for consumer workloads and supports Microsoft DirectStorage.
Suited for Gen5 platforms; not for older slots
This drive suits builders with a motherboard that exposes a PCIe Gen5 x4 M.2 slot and wants the cooler pre-fitted. Systems limited to PCIe Gen3 or Gen4 M.2 slots will not reach the advertised sequential speeds. The active cooler requires adequate airflow inside the chassis. Laptops or small-form-factor boards without clearance for the cooler should consider a bare drive instead.
Sequential read speed decides the fit
The headline specification is the maximum sequential read of up to 12,400 MBps. That figure determines whether the drive can saturate a Gen5 link for large-file transfers and DirectStorage gaming workloads. If the platform cannot deliver Gen5 bandwidth, the extra headroom goes unused.
Besonderheiten
- Gen5 PCIe x4 interface delivers up to 12400MB/s reads for faster load times
- Active air cooler keeps temperatures low during sustained workloads
- High-density 3D TLC NAND provides 1TB capacity with 700TBW endurance
- DirectStorage compatible for reduced CPU overhead in supported games
- Compact M.2 2280 form factor fits standard motherboard slots
Technische Daten
| Brand | Corsair |
|---|---|
| Series | MP700 PRO |
| Part Number | CSSD-F1000GBMP700PRO/RF2 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | High-density 3D TLC NAND |
| Interface | High-speed Gen5 PCIe x4 NVMe 2.0 M.2 interface |
| Protocol | NVMe 2.0 |
| Max Sequential Read | Up to 12400 MBps |
| Max Sequential Write | Up to 11800 MBps |
Fragen zu diesem Artikel
Do I need a motherboard with a PCIe 5.0 x4 M.2 slot to install this drive?
It works in a PCIe 5.0 x4 M.2 slot and is backward compatible with PCIe Gen4, so a Gen4 slot will also run the drive.
Will the included active cooler fit if I keep my existing Gen4 motherboard?
The cooler is built onto the M.2 2280 module and the drive remains backward compatible with PCIe Gen4 boards.
How can I confirm the drive is delivering its rated 12,400 MB/s sequential read after setup?
Run a benchmark such as CrystalDiskMark; the drive should show up to 11,700 MB/s read and 9,600 MB/s write under that tool.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
