DELL
DELL 400-ANWZ 2TB 2.5" SAS 7200 RPM internal hard drive
A 2 TB 2.5" internal hard drive with a SAS 12Gb/s interface, 7200 RPM spindle speed and hot-swap support for compatible Dell PowerEdge servers
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity2TB
- RPM7200 RPM
- Average Latency12Gb/s
- Form Factor2.5"
- 2 TB capacity expands server storage
- 7200 RPM spindle speeds up data access
- SAS 12Gb/s interface enables fast transfers
- 5 inch form factor fits dense bays
- Hot-swappable design allows drive changes without downtime
2 TB SAS drive for servers
This 2 TB internal hard drive uses a SAS 12Gb/s interface and spins at 7200 RPM. It is built for Dell PowerEdge servers such as the M630 and fits 2.5" hot-swap bays. The drive is new and shipped as a bare unit without retail packaging.
Capacity and headroom
Two terabytes provide room for operating-system images, logs and moderate data sets on near-line storage tiers. At 7200 RPM the drive handles sequential workloads well but will saturate before high-transaction databases or write-intensive caches. The 12Gb/s SAS link removes the interface bottleneck so the spindle speed remains the limiting factor.
Build integration
The 2.5" form factor slides directly into compatible hot-swap trays without adapters or cables. Hot-plug support lets you add or replace the drive while the server runs, keeping uptime intact. A SAS backplane or HBA capable of 12Gb/s is required to use the full interface speed; older 6Gb/s controllers will work at reduced throughput.
Besonderheiten
- 2 TB capacity expands server storage
- 7200 RPM spindle speeds up data access
- SAS 12Gb/s interface enables fast transfers
- 5 inch form factor fits dense bays
- Hot-swappable design allows drive changes without downtime
Technische Daten
| Brand | Dell |
|---|---|
| Model | 400-ANWZ |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 2TB |
| RPM | 7200 RPM |
| Average Latency | 12Gb/s |
| Form Factor | 2.5" |
Fragen zu diesem Artikel
Will the 2.5" SAS 12Gb/s drive work in my older server that only has 6Gb/s SAS backplanes?
The drive uses a 12Gb/s SAS interface and will negotiate down to 6Gb/s on older backplanes, so it will function at the slower link speed.
How can I verify the 7200 RPM drive is performing correctly after installation?
Check the drive's reported spindle speed and interface link rate in the server's RAID controller BIOS or management utility to confirm 7200 RPM and 12Gb/s SAS operation.
Does the bare drive include a caddy or mounting bracket for the PowerEdge M630?
The drive is supplied as a bare unit without a caddy; a compatible Dell 2.5" hot-swap carrier must be purchased separately for installation in the PowerEdge M630.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
