DELL H962F 250GB 7200RPM 3.5" SATA 3Gb/s 16MB internal hard drive

Dell Enterprise H962F 250GB 3.5" SATA Drive

The Dell Enterprise H962F is a 250GB 3.5-inch SATA hard drive spinning at 7200RPM with a 16MB buffer. It is certified for select Dell PowerEdge and PowerVault systems and validated for those platforms. This bare drive suits administrators replacing a failed drive in a qualified Dell array or expanding storage in a compatible 3.5-inch SAS or SATA bay. It is not for buyers who need higher capacity or a modern 6Gb/s SATA interface.

Thermals Noise and Power in Normal Use

As a 7200RPM enterprise SATA drive, the H962F generates typical mechanical drive heat and audible seek noise during operation. Power draw follows standard 3.5-inch enterprise SATA patterns under normal workloads. No specific acoustic or thermal ratings are provided in the manufacturer data. Builders who require silent solid-state operation or detailed thermal specifications for dense enclosures should look elsewhere.

Build Fit Requirements and Freedoms

The drive fits a standard 3.5-inch SAS or SATA drive bay and connects via a SATA 3Gb/s interface. It requires a compatible backplane or controller that supports 3Gb/s SATA signalling and the Dell-qualified firmware environment for guaranteed operation. Using this drive frees a spare bay in a certified Dell system without needing an adapter or carrier. It does not fit 2.5-inch bays, M.2 slots, or SAS-only backplanes that reject SATA devices.