Dell PowerEdge R930 4U Rack Server 4x Xeon E7-8890 v4 2.2GHz 24C 768GB DDR4 H730P 24x 600GB SAS

Four-Socket Xeon Server for Enterprise Workloads

The Dell PowerEdge R930 is a 4U rack server equipped with four Intel Xeon E7-8890 v4 processors, each running at 2.2 GHz with 24 cores. It ships with 768 GB of DDR4 memory installed across 48 modules and supports a maximum capacity of 12 TB across 96 slots. The system targets organisations running memory-intensive databases, virtualisation clusters, or analytics platforms that demand high core counts and large memory footprints.

Installation and Common Pitfalls

The chassis includes ready rails and a front bezel for standard rack mounting, while 24 hot-plug 2.5-inch drive bays allow storage changes without downtime. Four 1100 W platinum power supplies provide redundancy but require adequate PDU capacity and correct IEC cabling. The PERC H730P controller manages RAID 0, 1, 5, 6, 10, 50 and 60; misconfigured virtual disks or missing battery backup are the most frequent setup issues. Remote management through iDRAC8 Enterprise should be configured before the server enters production.

Pre-Purchase Compatibility Checks

Verify that your rack provides 4U of vertical space and sufficient depth for the rails supplied. Confirm the facility can deliver the required power phase and connector type for four 1100 W units. Ensure the existing network infrastructure supports the dual 1 GbE and dual 10 GbE SFP+ ports on the X520/I350 daughter card. Finally, validate that your operating system and hypervisor versions are certified for the Xeon E7-8890 v4 and the C602J chipset.