Epoch
Epoch 8TB 7.2K SATA 3.5" 6Gb/s internal hard drive
An 8 TB, 7200 RPM SATA 3.5" drive built for Dell PowerEdge 14 and 15 generation servers
- InterfaceSATA
- Capacity8TB
- RPM7200 RPM
- UsageIdeal for Servers
- Form Factor3.5"
- 8TB capacity stores large server datasets
- 7200 RPM spindle speed delivers responsive data access
- SATA 6Gb/s interface connects to standard controllers
- 5" form factor fits Dell PowerEdge 14G and 15G bays
- Compatible with Dell Tower 15G servers including T150 T350 T550
Server Storage Capacity
This 8TB 3.5-inch hard drive uses a SATA 6Gb/s interface and spins at 7200 RPM. It is built for desktop and server bays that accept standard 3.5-inch SATA drives. The kit is validated for Dell PowerEdge 14th and 15th generation rack and tower servers.
Workload Fit
It suits administrators adding bulk capacity to compatible Dell PowerEdge R-series and T-series servers. Buyers who need a different drive interface or a smaller form factor should look elsewhere. The drive is not intended for laptops or compact enclosures that only accept 2.5-inch devices.
Deciding Specification
The SATA 6Gb/s interface determines whether this drive fits your server backplane or controller. Verify that your system supports 3.5-inch SATA hard drives before purchasing.
Besonderheiten
- 8TB capacity stores large server datasets
- 7200 RPM spindle speed delivers responsive data access
- SATA 6Gb/s interface connects to standard controllers
- 5" form factor fits Dell PowerEdge 14G and 15G bays
- Compatible with Dell Tower 15G servers including T150 T350 T550
Technische Daten
| Interface | SATA |
|---|---|
| Capacity | 8TB |
| RPM | 7200 RPM |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
Fragen zu diesem Artikel
Does the 7200 RPM spindle speed limit sustained write throughput under heavy server workloads?
The drive spins at 7200 RPM with a SATA 6Gb/s interface, so sustained write speed is bounded by the mechanical rotation and the SATA bus rather than a firmware throttle.
How much heat and noise does the 3.5" 8TB drive produce when running continuously in a Dell PowerEdge rack?
As a 3.5" 7200 RPM enterprise drive it generates typical mechanical noise and heat for its class; adequate chassis airflow in the supported PowerEdge servers keeps temperatures within spec.
Which drive carrier or caddy is required to install this drive in a 14G or 15G PowerEdge server?
The kit is a replacement drive for the listed Dell PowerEdge 14G and 15G models; you must use the server's original 3.5" hot-plug carrier for proper fit and connection.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
