GIGABYTE
GIGABYTE AORUS 5000E 1.0TB internal SSD
1.0 TB M.2 2280 NVMe drive delivers up to 5,000 MB/s read and 4,600 MB/s write with 3D TLC NAND and a 600 TBW endurance rating
- Up to 5,000 MB/s sequential read for rapid file access
- Up to 4,600 MB/s sequential write for fast data transfers
- PCI-Express 4.0 x4 NVMe 1.4 interface enables high bandwidth
- 5 million hours MTBF indicates long-term reliability
- 600 TBW endurance rating supports heavy workloads
Capacity and interface
This 1.0 TB drive uses the M.2 2280 form factor and a PCI-Express 4.0 x4 link with NVMe 1.4. It is built for desktops and laptops that need fast primary storage in a compact module.
Build integration
The single-sided 80 x 22 x 2.3 mm board fits standard M.2 slots without blocking adjacent components. Average power draw sits at 4.2 W read and 4.3 W write, dropping to 20 mW idle, so thermal headroom stays modest in tight chassis.
Software and endurance
GIGABYTE SSD Toolbox reports the Percentage Used SMART attribute; when it reaches 100 the warranty period ends. Coverage lasts five years or 600 TBW, whichever comes first, and the drive is rated for 1.5 million hours MTBF.
Besonderheiten
- Up to 5,000 MB/s sequential read for rapid file access
- Up to 4,600 MB/s sequential write for fast data transfers
- PCI-Express 4.0 x4 NVMe 1.4 interface enables high bandwidth
- 5 million hours MTBF indicates long-term reliability
- 600 TBW endurance rating supports heavy workloads
Technische Daten
Für diesen Artikel sind noch keine technischen Daten veröffentlicht.
Fragen zu diesem Artikel
At what point does the endurance limit trigger under heavy daily writes?
The drive is rated for 600 TBW or five years, and the warranty ends when the SMART Percentage Used attribute reaches 100.
What are the typical power draw and operating temperature range when the SSD runs continuously?
Average read power is 4.2 W and write power is 4.3 W, with an idle draw of 20 mW, operating between 0 °C and 70 °C.
Which motherboard slot and protocol are required for this M.2 2280 drive to function?
A PCIe 4.0 x4 M.2 slot with NVMe 1.4 support is needed for the drive to operate.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
