HPE ProLiant DL380 Gen11 2U Rack Server Dual Xeon 4410y 12-Core 2.00GHz 1TB DDR5 61.44TB SATA SSD

Dual Xeon 4410y 12-Core Server for Virtualised

The HPE ProLiant DL380 Gen11 is a 2U rack server built around two Xeon Silver 4410y processors, each with 12 cores running at 2.00 GHz and a 3.90 GHz turbo frequency. It ships with 1TB of DDR5-4800 ECC buffered memory across 16 modules of 64GB. The bundle includes 61.44TB of enterprise SATA SSD storage on eight 7.68TB drives. This configuration targets organisations running databases, virtualisation platforms or multiple simultaneous applications in hybrid environments.

SATA III 6Gb/s Interface Limits Sequential

The storage array uses eight 2.5-inch enterprise SSDs connected through a SATA III 6Gb/s interface, which caps maximum sequential transfer rates at the interface limit. The MR408i-o Gen11 storage controller provides x8 lanes and 4GB cache to manage RAID across the drives. Network connectivity relies on an embedded four-port 1GbE OCP3 adapter, restricting each link to gigabit speeds. PCIe Gen5 slots are present for additional expansion cards, but the supplied drives and network ports operate within the stated SATA and 1GbE boundaries.

Memory and Drives Ship Separately Requiring Manual

The 16 DDR5 memory modules and eight 2.5-inch SSDs arrive uninstalled, so the administrator must populate DIMM slots and drive bays before commissioning. The 2U chassis supports hot-swappable redundant power supplies, allowing a failed unit to be replaced without downtime. Remote management is handled by iLO 6 with Intelligent Provisioning for firmware updates and deployment automation. A rail kit is included for rack mounting. Careful handling of ECC buffered DIMMs and correct drive carrier insertion are the main installation considerations.