Intel
Intel SSDPF2KX038T1N1 P5520 3.84TB NVMe U.2 15mm enterprise SSD
3.84 TB enterprise NVMe SSD with PCIe 4.0 x4 interface in a 15 mm U.2 form factor
- 84 TB capacity supports large enterprise datasets
- PCIe 4.0 x4 interface enables high-speed data transfer
- NVMe protocol reduces latency for demanding workloads
- 3D TLC NAND balances endurance with cost efficiency
- 15 mm U.2 form factor fits dense server deployments
Intel P5520 U.2 15mm enterprise drive
This Intel P5520 solid state disk delivers 3.84TB of storage in a U.2 15mm form factor. It connects via a PCIe 4.0 x4 link using the NVMe protocol and uses 3D TLC flash memory. The drive is built for server environments that demand consistent throughput and endurance.
Suited for PCIe 4.0 server bays needing 3.84TB
This drive fits servers with U.2 15mm hot-plug bays that support PCIe 4.0 x4 electrical connections. It is not suitable for systems limited to PCIe 3.0 backplanes, M.2 slots, or 7mm drive cages. Buyers requiring a different capacity or a smaller physical height should consider other models.
PCIe 4.0 x4 NVMe interface decides compatibility
The single specification that determines fit is the PCIe 4.0 x4 NVMe interface combined with the U.2 15mm form factor. Your server backplane and drive cage must provide this exact electrical and mechanical connection for the drive to operate.
Besonderheiten
- 84 TB capacity supports large enterprise datasets
- PCIe 4.0 x4 interface enables high-speed data transfer
- NVMe protocol reduces latency for demanding workloads
- 3D TLC NAND balances endurance with cost efficiency
- 15 mm U.2 form factor fits dense server deployments
Technische Daten
Für diesen Artikel sind noch keine technischen Daten veröffentlicht.
Fragen zu diesem Artikel
Will this 15 mm U.2 drive fit my 2.5-inch hot-swap bay?
The drive is built to the 15 mm U.2 form factor, so it fits standard 2.5-inch U.2 hot-swap bays that accept 15 mm height.
What is the correct way to seat the PCIe 4.0 x4 connector during installation?
Align the U.2 connector with the backplane port and press firmly until the drive clicks into the carrier; the PCIe 4.0 x4 link will not train if the connector is not fully seated.
How do I know when the 3.84 TB 3D TLC media needs replacement?
Use the NVMe SMART log to track the percentage-used and media-wear indicators; replace the drive when those counters reach the vendor-defined endurance limit.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
