BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00280417BTC
Auf Lager
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 SODIMM Kit for POSIFLEX XT-3915-G2 JIVA Foldable 15 Terminal
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB kit boosts POS terminal responsiveness
- DDR4 3200 speed matches system memory bus
- CL22 latency supports stable transaction processing
- 2 V operation reduces thermal load in compact kiosk
- 260-pin SODIMM form factor fits POSIFLEX XT-3915-G2 slot
Compatible POS Terminal Memory
This 16GB kit is built for the POSIFLEX XT-3915-G2 JIVA Foldable 15 Terminal. It delivers 2x8GB DDR4 3200 modules that match the system's PC4-25600 specification. The Non-ECC unbuffered design suits standard point-of-sale workloads. Buyers upgrading other hardware should verify their platform accepts SODIMM memory.
260-Pin SODIMM Build
Each module uses a 260-pin edge connector with 2Rx8 organisation and 1.2V operation. No heat spreader is fitted, keeping the profile low for tight terminal chassis. Major OEM chips from Samsung, Micron or Hynix are used under the NEMIX RAM POS series label. Installers should confirm the terminal has two free SODIMM slots before starting.
Pre-Order Configuration Check
Verify the terminal currently runs DDR4 SODIMM memory and supports CL22 timing at 3200MT/s. Ensure the motherboard accepts Non-ECC unbuffered modules in a dual-channel pair. The kit is not compatible with systems that require ECC, registered DIMMs or a different DDR generation. Check the service manual for slot count and maximum capacity per slot.
Besonderheiten
- 16 GB kit boosts POS terminal responsiveness
- DDR4 3200 speed matches system memory bus
- CL22 latency supports stable transaction processing
- 2 V operation reduces thermal load in compact kiosk
- 260-pin SODIMM form factor fits POSIFLEX XT-3915-G2 slot
Technische Daten
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT |
Fragen zu diesem Artikel
Does the DDR4 3200 SODIMM run at its rated 3200 MT/s in the POSIFLEX XT-3915-G2 JIVA Foldable 15 Terminal?
The kit is rated DDR4 3200 (PC4-25600). The terminal's memory controller will set the final speed; if it supports DDR4 3200 the modules will run at that rate, otherwise they downclock to the highest supported JEDEC speed.
What physical slot and pin count does this 260-pin SODIMM need in the terminal?
It requires a standard DDR4 SO-DIMM socket with 260 pins; the XT-3915-G2 JIVA Foldable 15 Terminal uses that form factor, so each 8 GB module fits directly into the available slot.
How do I install the two 8 GB sticks and what step is often missed?
Power off and unplug the terminal, open the memory compartment, align each module's notch with the key in the 260-pin slot, insert at an angle then press down until the side clips click; the commonly missed step is verifying both clips lock fully on each stick.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
