BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00280732BTC
Auf Lager
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V UDIMM for ASRock IMB-1315/1318
A 64 GB dual-channel DDR5 kit running at 5600 MT/s with CL46 latency, built for ASRock IMB-1315 and IMB-1318 industrial boards
- Capacity64GB (2 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity from two 32 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency for responsive operation
- Low 1.1 V voltage reduces power draw
- Validated for ASRock IMB-1315 and IMB-1318 motherboards
ASRock IMB-1315/1318 DDR5 memory kit
This 64 GB kit contains two 32 GB DDR5 UDIMMs validated for ASRock Industrial Micro-ATX motherboards IMB-1315 and IMB-1318. The modules run at 5600 MT/s with CL46 latency at 1.1 V. They are non-ECC and unbuffered, matching the board's standard desktop memory layout.
288-pin unbuffered modules without heat spreaders
Each stick uses a 288-pin DDR5 edge connector and a 2Rx8 organisation built from major OEM Samsung, Micron or Hynix chips. The bare-PCB design keeps the profile low for tight industrial chassis, and the 1.10 V operating voltage matches the platform's default DDR5 rail. No extra power cables or firmware steps are required.
Verify board revision and slot population rules
Confirm your motherboard is an IMB-1315 or IMB-1318 revision that supports 32 GB single-rank densities and dual-channel operation with two UDIMMs. Check the manual for any BIOS version requirement before installing, and ensure the CPU memory controller is rated for 5600 MT/s operation. Builders needing ECC, registered DIMMs or higher capacities should look elsewhere.
Besonderheiten
- 64 GB total capacity from two 32 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency for responsive operation
- Low 1.1 V voltage reduces power draw
- Validated for ASRock IMB-1315 and IMB-1318 motherboards
Technische Daten
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock Industrial |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Fragen zu diesem Artikel
What speed does the DDR5 5600 interface run at on the ASRock IMB-1315 and IMB-1318?
The kit operates at DDR5 5600 (PC5-44800) with CL46 latency at 1.1 V on the listed ASRock boards.
Will the 288-pin UDIMM modules fit the Micro-ATX IMB-1315 and IMB-1318 motherboards?
Yes, each 32 GB module uses the standard 288-pin DDR5 UDIMM form factor required by those boards.
How do I install the two 32 GB sticks and which slot order avoids the common mistake?
Power off, open the chassis, align each module's notch with the slot key, press firmly until the retention clips click, then verify both sticks are seated in the correct channel pair per the board manual.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
