NEMIX RAM
NEMIX RAM 96GB 6x16GB DDR5 6400 CL52 1.1V ECC RDIMM Kit Supermicro H13DSH memory upgrade
Sixteen-gigabyte DDR5 registered ECC modules populate six slots for 96 GB at 6400 MT/s, CL52 and 1.1 V on Supermicro H13DSH
- Capacity96GB (6 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match DDR5-6400 kit installs at rated speed and full capacity
- Registered ECC design corrects single-bit errors for production stability
- 96 GB in six 16 GB modules fills every slot on H13DSH
- 1 V operation keeps power draw low under sustained load
- CL52 CAS latency matches the board's memory controller expectations
Server DDR5 RDIMM kit
This NEMIX RAM kit supplies 96 GB across six 16 GB DDR5 6400 modules built as 288-pin Registered ECC RDIMMs. Each stick runs at 1.1 V with CL52 latency and a 1Rx8 rank layout. The kit is validated for the Supermicro H13DSH motherboard so the memory controller recognises the full capacity at rated speed.
For registered-ECC servers
It suits administrators upgrading a Supermicro H13DSH platform that requires registered ECC DDR5 RDIMMs populated in multiples of six. It does not suit builds needing unbuffered UDIMMs, SODIMM form factors, non-ECC memory, or a different module count than the board's population rules allow.
Check motherboard population rules
Confirm the H13DSH manual for approved DIMM slot order, maximum supported capacity per channel, and any BIOS version requirements before installing. Verify that all six slots designated for this configuration are free and that the board's firmware is current for DDR5 6400 operation.
Besonderheiten
- Exact-match DDR5-6400 kit installs at rated speed and full capacity
- Registered ECC design corrects single-bit errors for production stability
- 96 GB in six 16 GB modules fills every slot on H13DSH
- 1 V operation keeps power draw low under sustained load
- CL52 CAS latency matches the board's memory controller expectations
Technische Daten
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K6 |
| Capacity | 96GB (6 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 6X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Fragen zu diesem Artikel
Does my Supermicro H13DSH motherboard need a specific DIMM population order for this 6x16GB DDR5 6400 kit?
Yes, the H13DSH manual defines the exact slot sequence for six registered DIMMs; follow that order so the memory controller initialises all 96GB at DDR5-6400 with CL52 timing.
Will these 1Rx8 registered ECC modules run in mixed populations with older RDIMMs I already have installed?
Mixing ranks or speeds forces the controller to the lowest common denominator; for full 96GB at rated DDR5-6400 CL52, populate all six slots with this matched kit only.
How can I confirm the kit is operating at DDR5-6400 CL52 1.1V after installation?
Check the BIOS memory information screen or run a tool such as dmidecode; it should report each DIMM at 6400 MT/s, CAS 52, 1.10 V and ECC enabled.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 $
0.0013317BTC
Auf Lager
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 $
0.00010135BTC
Auf Lager