SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00497892BTC
Auf Lager
NEMIX RAM
NEMIX RAM DDR5 6400 256GB 2x128GB CL52 2Rx4 ECC RDIMM Supermicro H13DSH memory upgrade
256 GB (2 × 128 GB) DDR5-6400 ECC registered RDIMM kit, CL52 at 1.1 V, validated for the Supermicro H13DSH motherboard
- Capacity256GB (2 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB total capacity from a matched 2 x 128 GB kit
- DDR5 6400 speed (PC5-51200) runs at the rated frequency on Supermicro H13DSH
- Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
- 2Rx4 organisation with 1.1 V voltage matches the motherboard's memory-controller expectations
- 288-pin RDIMM form factor fits the H13DSH slots and follows its population rules
Exact-match DDR5-6400 server upgrade
This 256 GB kit delivers two 128 GB DDR5-6400 PC5-51200 RDIMMs built to the precise rank, voltage and timing the Supermicro H13DSH memory controller expects. Registered ECC architecture with 2Rx4 organisation and CL52 latency ensures full-capacity recognition at rated speed for memory-intensive server workloads.
Sustained-load stability
Registered buffering offloads the memory controller so every populated slot runs at full capacity without signal degradation during continuous operation. On-die ECC catches and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots that would interrupt production services.
Pre-installation checklist
Verify your H13DSH motherboard manual for approved DIMM population order, maximum supported capacity per slot and required BIOS version before ordering. Confirm the system accepts 288-pin Registered DDR5 RDIMMs at 1.1 V and that your chassis provides adequate airflow for modules without heat spreaders.
Besonderheiten
- 256 GB total capacity from a matched 2 x 128 GB kit
- DDR5 6400 speed (PC5-51200) runs at the rated frequency on Supermicro H13DSH
- Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
- 2Rx4 organisation with 1.1 V voltage matches the motherboard's memory-controller expectations
- 288-pin RDIMM form factor fits the H13DSH slots and follows its population rules
Technische Daten
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Fragen zu diesem Artikel
How much power does the 1.1V DDR5 6400 kit draw when the Supermicro H13DSH runs all day?
Each module operates at 1.1V, the standard DDR5 voltage, so total power scales with the 256GB capacity and your server's memory-controller load.
What must the Supermicro H13DSH already have to accept this 2Rx4 288-pin RDIMM kit?
The board needs free 288-pin DDR5 RDIMM slots and a BIOS that supports 128GB 2Rx4 registered ECC modules at DDR5 6400.
Will this CL52 2Rx4 kit run at DDR5 6400 alongside slower DDR5 DIMMs I keep in the H13DSH?
The motherboard will clock all populated slots to the lowest common speed, so older DDR5 modules will pull this kit down from 6400 MT/s.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
