BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.002786BTC
Auf Lager
NEMIX RAM
NEMIX RAM DDR5 6400 ECC RDIMM 1TB 16x64GB CL52 1.1V Supermicro H14DSG-OM
1 TB registered ECC DDR5 kit with sixteen 64 GB modules at 6400 MT/s, CL52, 1.1 V for the Supermicro H14DSG-OM motherboard
- Capacity1TB (16 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 1TB capacity with sixteen 64GB modules for maximum density
- DDR5 6400 speed with CL52 latency at 1.1V for rated performance
- ECC registered RDIMM corrects errors and buffers signals for stability
- 288-pin 2Rx4 form factor matches Supermicro H14DSG-OM requirements exactly
- Major OEM Samsung Micron Hynix chips ensure enterprise-grade reliability
1TB DDR5 ECC RDIMM kit for Supermicro H14DSG-OM
This 1TB kit contains sixteen 64GB DDR5 6400 Registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DSG-OM memory controller expects. Each 288-pin RDIMM runs at 1.1V with CL52 latency and 2Rx4 organisation. The registered architecture allows every slot to be populated at full capacity without signal degradation.
Sustained-load behaviour
Registered buffering offloads the memory controller so all sixteen modules operate at the rated DDR5 6400 speed even when every channel is fully populated. ECC circuitry detects and corrects single-bit errors on the fly, preventing silent data corruption during long compute runs. The fixed 1.1V operating voltage and CL52 timing remain stable across continuous workloads without relying on overclock headroom.
Thermals noise and power
Modules ship without heat spreaders, relying on the server chassis airflow for cooling. At the standard 1.1V DDR5 voltage the power draw per DIMM stays within the JEDEC baseline for 64GB registered parts. No onboard fans or active cooling are present so acoustic output is limited to the system fans already required by the platform.
Besonderheiten
- 1TB capacity with sixteen 64GB modules for maximum density
- DDR5 6400 speed with CL52 latency at 1.1V for rated performance
- ECC registered RDIMM corrects errors and buffers signals for stability
- 288-pin 2Rx4 form factor matches Supermicro H14DSG-OM requirements exactly
- Major OEM Samsung Micron Hynix chips ensure enterprise-grade reliability
Technische Daten
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K16 |
| Capacity | 1TB (16 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1TB 16X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Fragen zu diesem Artikel
How much heat and power should I expect from the 16 modules running at 1.1V CL52 all day?
Each DDR5 RDIMM operates at 1.10 V with no heat spreader, so total power draw and thermals depend on the Supermicro H14DSG-OM platform's airflow and memory-controller load rather than a single module rating.
What must my Supermicro H14DSG-OM already have to accept this 16 x 64 GB kit?
The board needs 16 free 288-pin DDR5 RDIMM slots, a BIOS that supports 2Rx4 registered ECC at DDR5 6400, and a memory-controller configuration that allows full 1 TB population per the manual's population rules.
Can I mix these 2Rx4 DDR5 6400 RDIMMs with slower DDR5 modules already in the server?
The kit is validated for the H14DSG-OM at 6400 MT/s CL52 1.10 V; adding modules of different rank, speed or voltage will force the controller to down-clock the entire array to the lowest common settings.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
