BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277984BTC
Auf Lager
SAMSUNG
SAMSUNG 256GB (8 x 32GB) DDR4 PC4-21300 2666MHz CL19 288-Pin RDIMM memory upgrade
Eight 32 GB registered DDR4 DIMMs running at 2666 MHz CL19 for compatible HP ProLiant Gen10 servers
- Capacity256GB
- 256 GB total capacity from eight 32 GB modules
- 2666 MHz DDR4 speed rated at PC4-21300
- CL19 CAS latency for registered server DIMMs
- 288-pin RDIMM form factor fits Gen10 ProLiant slots
- Validated for DL360, DL380, DL160, DL120, ML350, ML150 Gen10 servers
Server memory kit for HP ProLiant Gen10
This Samsung kit supplies 256 GB of DDR4 registered memory across eight 32 GB RDIMMs. It is built for administrators upgrading HP ProLiant DL360, DL380, DL160, DL120, ML350 or ML150 Gen10 servers that require PC4-21300 modules.
Registered RDIMM build with 288-pin DDR4 interface
Each module uses a registered design that places a register between the DRAM and the memory controller, reducing electrical load on the server board. The 288-pin DDR4 form factor fits the standard DIMM slots on the listed Gen10 platforms and runs at 2666 MHz with CL19 latency.
Verify slot count and maximum capacity before
Confirm that your chassis has enough free DIMM sockets for all eight modules and that the system BIOS supports the total 256 GB capacity. This kit will not work in desktop boards or in servers that require unbuffered UDIMMs or a different memory speed.
Besonderheiten
- 256 GB total capacity from eight 32 GB modules
- 2666 MHz DDR4 speed rated at PC4-21300
- CL19 CAS latency for registered server DIMMs
- 288-pin RDIMM form factor fits Gen10 ProLiant slots
- Validated for DL360, DL380, DL160, DL120, ML350, ML150 Gen10 servers
Technische Daten
| Capacity | 256GB |
|---|
Fragen zu diesem Artikel
What does PC4-21300 mean for this DDR4 kit?
PC4-21300 is the DDR4 specification compliance for these modules, which run at 2666MHz with CL19 latency.
Will the 288-pin RDIMMs fit my HP ProLiant Gen10 server?
The 288-pin registered DIMM form factor matches the memory slots in DL360, DL380, DL160, DL120, ML350 and ML150 Gen10 servers.
How do I install the eight 32GB modules correctly?
Populate all eight slots following the server's memory population guide; the common mistake is leaving gaps between modules instead of filling consecutive banks.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
