Seagate
Seagate Constellation ES.3 ST2000NM0033 2TB 7.2K RPM 6Gb/s 3.5" SATA internal hard drive
A 2 TB, 7200 RPM SATA desktop hard drive with 128 MB cache, sold as a lot of 10 new units
- 2 TB capacity stores large datasets
- 7200 RPM spindle speed accelerates data access
- 128 MB cache buffers burst workloads
- 6 Gb/s SATA interface enables fast transfers
- 5-inch form factor fits standard drive bays
Enterprise capacity drive
The Seagate Constellation ES.3 ST2000NM0033 is a 2000GB 3.5-inch internal hard drive spinning at 7200RPM with a SATA 6Gb/s interface and 128MB cache. It is built for continuous operation in servers, NAS appliances and high-capacity desktop storage arrays. The lot contains ten new drives.
Suited for bulk storage.
This drive suits administrators who need large volumes of cost-effective, always-on storage for backups, archives or media libraries. It is not designed for workloads that demand low latency or high IOPS, such as operating-system boots, database indexing or real-time analytics.
7200RPM spindle speed
The 7200RPM rotational speed is the single specification that determines whether this drive meets your performance envelope. It delivers higher sustained throughput than slower-spinning nearline drives, but it also draws more power and generates more heat and noise. Verify that your chassis cooling and power budget accommodate ten drives at this spindle speed before purchase.
Besonderheiten
- 2 TB capacity stores large datasets
- 7200 RPM spindle speed accelerates data access
- 128 MB cache buffers burst workloads
- 6 Gb/s SATA interface enables fast transfers
- 5-inch form factor fits standard drive bays
Technische Daten
Für diesen Artikel sind noch keine technischen Daten veröffentlicht.
Fragen zu diesem Artikel
Does my desktop need a free 3.5-inch drive bay and a SATA data plus power cable to install this ST2000NM0033?
Yes, the drive is a 3.5-inch SATA unit so you need an open 3.5-inch bay, a SATA data cable to the motherboard and a SATA power connector from the PSU.
Will this 7200RPM SATA drive work on a motherboard that only supports the older 3Gb/s SATA standard?
The drive uses the SATA 6Gb/s interface and is backward compatible with 3Gb/s ports, though maximum transfer speed will be limited to the slower link.
How can I verify the 128MB cache and 7200RPM speed are active after I install the drive?
Check the drive details in your OS device manager or a tool like CrystalDiskInfo; they will report the 128MB buffer size and 7200RPM rotational speed.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
