Wir akzeptieren Kryptowährungen — so können die Coins, die Sie besitzen, echte Hardware kaufen.Zahlen Sie mit Krypto, geben Sie sie für echte Hardware aus. Weltweit kostenloser versicherter Versand ab 399 $. Neutrale Kartons ohne Markenaufdruck, versendet aus Deutschland.Kostenloser versicherter Versand ab 399 $. Ihr Kurs wird 30 Minuten lang gesperrt, sobald die Kasse geöffnet wird.Kurs 30 Minuten gesperrt. Jeder Artikel ist versiegelt, die Seriennummer wird geprüft, und es gilt eine Garantie von 24 Monaten.Versiegelt, 24 Monate Garantie.

Gemerkte Artikel Anmelden

SXDOOL

SXDOOL mf80251v3-1q03c-s9a 80mm 12V 1.01W 4-pin case fan

SKU CH-B2AW-BHPPM MPN mf80251v3-1q03c-s9a

An 80 mm PWM case fan with a 25 mm frame, 12 V power and a 4-pin connector for quiet, low-noise cooling

  • TypeCase Fan
  • Quiet 12 V PWM operation keeps noise low
  • Compact 80 × 80 × 25 mm frame fits tight cases
  • 4-pin connector enables precise speed control
  • Low 1.01 W draw reduces system power load

80mm PWM case fan for compact builds

The SXDOOL mf80251v3-1q03c-s9a is an 80mm square fan with a 25mm thickness designed for standard case mounting. It runs on 12V power and draws 1.01W through a 4-pin PWM connector that allows automatic speed control from the motherboard. The unit is supplied new and targets builders fitting cooling into tight chassis or liquid-cooling radiators.

1.01W headroom suits low-restriction airflow

At 1.01W the motor delivers modest static pressure suited to open mesh panels or single-radiator loops. It will struggle against dense fin stacks, multi-radiator stacks or heavily filtered intakes where higher-pressure fans are required. Buyers needing stronger push-through force for restrictive radiators or dust filters should look elsewhere.

Besonderheiten

  • Quiet 12 V PWM operation keeps noise low
  • Compact 80 × 80 × 25 mm frame fits tight cases
  • 4-pin connector enables precise speed control
  • Low 1.01 W draw reduces system power load

Technische Daten

TypeCase Fan

Fragen zu diesem Artikel

Will the 4-pin PWM interface on this 80mm fan let my older motherboard control its speed automatically?

Yes, the 4-pin connector provides a PWM signal wire so compatible motherboards can adjust fan speed based on temperature without manual intervention.

How can I confirm the fan is running at the correct 12V and 1.01W after installation?

Check the hardware monitoring section in BIOS or use software like HWMonitor to verify the fan reports a speed reading and draws approximately 1.01W on the 12V rail.

Ebenfalls in dieser Kategorie

Kunden haben diese ebenfalls verglichen

Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.