Systor
Systor SYSNVME-HC410 1-to-10 SATA NVMe Duplicator 24GB/min
Standalone 1-to-10 SATA NVMe duplicator copies at 24GB/min and sanitises drives to NIST 800-88 and DoD 5220.22-M standards
DATA TRANSFER RATE 24.0GB/min [400MB/sec]
- 9.0GB/min [150MB/sec]
- 12.0GB/min [200MB/sec]
- 18.0GB/min [300MB/sec]
- 24.0GB/min [400MB/sec]
- Standalone duplicator clones ten drives without a PC
- 24 GB/min maximum copy speed across all targets
- Flexible cross-interface duplication between SATA and NVMe drives
- Secure erasure meets NIST 800-88 and DoD 5220.22-M standards
- Detailed log reports saved to SD card for audit trails
Source flexibility
This duplicator accepts a physical master drive in the source port or receives a disk image directly from a computer through the USB link. No host software is required for either method. The choice lets technicians match the workflow to the drives on hand.
Target users and limits
IT teams that need to clone or sanitise up to ten SATA or NVMe drives at once will benefit from the 24 GB per minute throughput and NIST 800-88 erase compliance. Buyers who want more than ten simultaneous targets or who require unsupported interfaces such as mini PCIe without adapters should consider a different solution.
Deciding specification
The unit provides ten target ports that auto-detect SATA and NVMe signals, allowing cross-interface duplication between 2.5-inch drives and M.2 modules up to 18 TB capacity. This port count and interface flexibility determine whether the system fits the workload.
Besonderheiten
- Standalone duplicator clones ten drives without a PC
- 24 GB/min maximum copy speed across all targets
- Flexible cross-interface duplication between SATA and NVMe drives
- Secure erasure meets NIST 800-88 and DoD 5220.22-M standards
- Detailed log reports saved to SD card for audit trails
Technische Daten
Für diesen Artikel sind noch keine technischen Daten veröffentlicht.
Andere Versionen dieses Modells
5 weitere aus dieser Serie
Gleiche Familie, unterschiedlicher Speicher, Kühler oder Takt — vergleichen Sie, bevor Sie sich entscheiden.
Systor 1-to-11 SATA NVMe Duplicator 12GB/min SYSNVME-M2211
- 1 to 11
- 12GB/min
Fragen zu diesem Artikel
What physical slots and drive sizes does the SYSNVME-HC410 accept for the ten target bays?
It accepts M.2 NVMe drives in 2230 and other lengths, plus 2.5 inch SATA SSDs and HDDs up to 18TB; mini PCIe and mSATA require separate adapters.
How do I start a copy job on the standalone duplicator, and what common step do users miss?
Insert the source into the dedicated master slot and targets into the ten bays, then press the single start button; users often forget to verify that each target is detected before beginning.
Which erasure standards does the sanitizer support for later compliance needs?
It supports NIST 800-88 Secure Erase, DoD 5220.22-M, and DoD Erase with Compare for certified sanitisation.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.








