Ubiquiti Networks
Ubiquiti Networks USW-Pro-24-POE (400W) 24-port Layer 3 network switch
- Rackmount
- Managed
565,99 $
0.00724393BTC
Auf Lager
Ubiquiti Networks
Ubiquiti Networks USW-Pro-48-POE (600W) network switch
A managed 48-port Layer 3 rackmount switch with 40 PoE+ and 8 PoE++ ports, four 10G SFP+ uplinks, 176 Gbps switching capacity and 600 W total PoE budget
- FormatRackmount
- Network Management TypeManaged
- Primary Ports48 x RJ45 + 4 x SFP+
- Primary Port SpeedTotal non-blocking throughput: 88 Gbps Switching capacity: 1
- Primary Port Type(48) GbE RJ45 ports (4) 1/10G SFP+ ports
- Management InterfaceEthernet In-Band
Model Pro 48 PoE
- Pro 48 PoE
- Pro 24 PoE
- Pro 48
- Pro 24
- Pro 8 PoE
Durchgestrichene Varianten existieren, sind hier aber nicht vorrätig.
- Layer 3 routing manages traffic between local networks
- 48 RJ45 ports plus 4 SFP+ uplinks deliver 88 Gbps throughput
- 40 PoE+ and 8 PoE++ ports provide 600 W total power budget
- Universal AC input plus 52 V DC backup input ensure continuous operation
- Near-silent cooling suits noise-sensitive rack environments
48-Port Layer 3 PoE++ Switch
The Ubiquiti Networks USW-Pro-48-POE (600W) is a managed, rackmount switch delivering Layer 3 routing and high-power PoE across 48 RJ45 ports plus four 10G SFP+ uplinks. It provides 600 W total PoE budget with 40 PoE+ ports and eight 60 W PoE++ ports for demanding endpoints.
Who This Suits and Who It Does Not
Network operators needing inter-VLAN routing, static routing and ACLs on a single appliance with dense PoE++ for cameras, access points or AV gear will fit this model. Buyers who need more than 48 copper ports or uplink speeds beyond 10 Gbps should look at larger aggregation switches.
The Spec That Decides Fit
The 600 W PoE budget shared across 48 ports — 40 at PoE+ and eight at 60 W PoE++ — determines whether the switch can power every attached device simultaneously without an external injector.
Besonderheiten
- Layer 3 routing manages traffic between local networks
- 48 RJ45 ports plus 4 SFP+ uplinks deliver 88 Gbps throughput
- 40 PoE+ and 8 PoE++ ports provide 600 W total power budget
- Universal AC input plus 52 V DC backup input ensure continuous operation
- Near-silent cooling suits noise-sensitive rack environments
Technische Daten
| Brand | Ubiquiti Networks |
|---|---|
| Model | Pro 48 PoE |
| Part Number | USW-Pro-48-POE (600W) |
| Format | Rackmount |
| Network Management Type | Managed |
| Primary Ports | 48 x RJ45 + 4 x SFP+ |
| Primary Port Speed | Total non-blocking throughput: 88 Gbps Switching capacity: 176 Gbps Forwarding rate: 130.944 Mpps |
| Primary Port Type | (48) GbE RJ45 ports (4) 1/10G SFP+ ports |
| Management Interface | Ethernet In-Band |
| VLAN Support | Yes |
| Jumbo Frames | Yes |
| PoE | Yes |
| Layer | 3 |
| Layer 2 Features | IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLs |
| Layer 3 Features | DHCP for locally-managed networks DHCP relay Inter-VLAN routing between networks on same switch Static routing between local networks Network isolation with ACLs |
| Port Mirroring | Yes |
| LEDs | System Status RPS Status |
| Button | Factory reset |
| PoE Ports | (40) PoE/PoE+ (Pins 1, 2+; 3, 6-) (8) 60W PoE++; PoE/PoE+ (Pins 1, 2+; 3, 6-) / PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-) |
| Power | (1) Universal input, 100—240V AC, 50/60 Hz (1) USP-RPS DC input, 52V DC, 11.54A; 11.5V DC, 5.22A |
| Max Power Consumption | 60W (Excluding PoE output) |
| Dimensions | 442 x 400 x 44 mm (17.4 x 15.7 x 1.7") |
| Weight | Without mounting brackets: 6.2 kg (13.8 lb) With mounting brackets: 6.3 kg (14 lb) |
| Certification | CE, FCC, IC |
| System Requirement | Unifi Network Version 5.10.5 and later |
| Temperature | -5 to 40° C (23 to 104° F) |
| Humidity | 10 to 90% noncondensing |
| Versandgewicht | 7.37 kg |
| Paketgröße | 521 × 503 × 122 mm |
Andere Versionen dieses Modells
1 weitere aus dieser Serie
Gleiche Familie, unterschiedlicher Speicher, Kühler oder Takt — vergleichen Sie, bevor Sie sich entscheiden.
Fragen zu diesem Artikel
What is the maximum uplink speed of the 4 SFP+ ports?
The four SFP+ ports support up to 10 Gbps each for high-speed backbone connectivity.
What are the exact dimensions and rack depth required to mount this switch?
The switch measures 442 mm wide, 400 mm deep and 44 mm high, requiring a rack with at least 400 mm usable depth.
How is the switch initially adopted into a UniFi network and what step is often missed?
Connect the management Ethernet port, power on the unit, then adopt it in the UniFi Controller; the step often missed is ensuring the controller and switch are on the same Layer 2 broadcast domain during adoption.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
NVIDIA
NVIDIA ConnectX-7 MCX75343AMS-NEAC 400GbE network card
- InfiniBand: NDR/NDR…
- Single-port OSFP In…
1.770,99 $2.021,99 $−12%
0.02266635BTC
Auf Lager