LONGER
LONGER Laser Engraver Enclosure with Vent 27.5 x 27.5 x 13 inches
- Laser Engraver
69,99 $
0.00089573BTC
Auf Lager
VEVOR
VEVOR 80W CO2 Laser Engraver 20 x 28 in 19.7 IPS KH7050
An 80 W CO₂ laser engraver with a 20 × 28 in working area, 19.7 IPS speed and 0.59 in maximum cutting thickness, compatible with LightBurn, CorelDRAW and AutoCAD on Windows, Mac OS and Linux
- TypeOther Appliances
- 80 W CO₂ laser cuts 15 mm acrylic in one pass
- 500 × 700 mm bed gives 560 in² of project space
- 7 IPS engraving speed finishes jobs quickly
- Works with LightBurn, CorelDRAW and AutoCAD on Windows, MacOS and Linux
- Front and rear pass-through doors accept oversized materials
80W CO2 Laser for Makers
This 80W CO2 laser engraver and cutter handles wood, acrylic, fabric and similar materials up to .59 in thick in a single pass. The 20 x 28 in bed provides 560 in² of workspace for larger projects or batch runs. It reaches cutting speeds of 19.7 IPS and runs on standard AC 120V 60Hz power.
Honeycomb Bed and Pass-Through Doors
A honeycomb-structured bed keeps the workpiece flat and stable during long jobs. Front and rear pass-through doors let you feed longer stock through the machine without resizing. Exhaust pipe, grounding wire and air-assist fittings are included for direct ventilation setup. Noise measures 70 dB during operation.
Software and Tube Life Limits
Control is limited to LightBurn, CorelDRAW and AutoCAD on Windows, Linux or MacOS. The CO2 laser tube is rated for 8000 hours of use before replacement is expected. Maximum single-pass cutting depth is .59 in on acrylic; thicker or denser materials will require multiple passes or a higher-wattage system.
Besonderheiten
- 80 W CO₂ laser cuts 15 mm acrylic in one pass
- 500 × 700 mm bed gives 560 in² of project space
- 7 IPS engraving speed finishes jobs quickly
- Works with LightBurn, CorelDRAW and AutoCAD on Windows, MacOS and Linux
- Front and rear pass-through doors accept oversized materials
Technische Daten
| Type | Other Appliances |
|---|
Fragen zu diesem Artikel
What software interfaces does the 80W CO2 laser engraver support for sending jobs?
The machine works with LightBurn, CorelDRAW and AutoCAD on Windows, Linux and MacOS.
What are the physical dimensions of the work bed and the clearance needed for the pass-through doors?
The honeycomb bed measures 20 by 28 inches (500 by 700 mm) giving 560 in²; front and rear pass-through doors require additional front and back clearance.
How do you install the exhaust and grounding before the first cut, and what step is often missed?
Connect the 120 V 60 Hz power cord, attach the smoke exhaust pipe, run the grounding wire to a proper earth point, then install the USB flash drive drivers — skipping the ground connection is the common mistake.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
