Zyvpee
Zyvpee AFB0612EH 6Z22 60mm 25mm 4-pin PWM case fan
A 60 × 25 mm 4-pin PWM case fan drawing 0.48 A at 12 V for CPU cooler mounting
- TypeCase Fan
- CompatibilityCPU Cooler
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- Dimensions60*25mm
- PWM control adjusts speed precisely
- 60 mm by 25 mm fits compact builds
- 4-pin connector enables motherboard speed regulation
- 12 V 0.48 A power specification
- Non-LED black design suits understated systems
60 mm PWM case fan for CPU coolers
This 60 mm square frame fan fits standard CPU cooler mounts and uses a four-pin PWM connector for automatic speed control. It is intended for builders replacing or upgrading a compact cooler fan in tight chassis spaces. The black non-LED design keeps the interior neutral without added lighting.
Four-pin PWM limits control to motherboard headers
Speed regulation depends on a motherboard or fan controller that supplies a PWM signal on the fourth pin; without that signal the fan will run at full voltage. The 12 V 0.48 A rating means the header must deliver at least that current, so very low-power headers may not start the motor reliably.
60×25 mm frame decides mechanical fit
The 60 mm width and 25 mm thickness determine whether the fan clears adjacent components and matches the cooler’s mounting holes; any deviation in either dimension will prevent installation. Verify the cooler’s specifications for exact hole spacing and maximum thickness before purchase.
Besonderheiten
- PWM control adjusts speed precisely
- 60 mm by 25 mm fits compact builds
- 4-pin connector enables motherboard speed regulation
- 12 V 0.48 A power specification
- Non-LED black design suits understated systems
Technische Daten
| Brand | 3ccooler.com |
|---|---|
| Series | AFB0612EH -6Z22 |
| Model | AFB0612EH |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Dimensions | 60*25mm |
Fragen zu diesem Artikel
Should I pick the 60 mm 25 mm AFB0612EH 6Z22 or a different size for my CPU cooler?
This model is a 60 mm by 25 mm fan with a 4‑pin PWM connector, designed for CPU coolers that accept 6025 mounting holes.
What does the 0.48 A rating mean once the fan is running in my system?
At 12 V the fan draws 0.48 A, so the motherboard header must supply at least that current for full PWM speed control.
How does the 4‑pin PWM interface limit performance in practice?
The 4‑pin PWM connector lets the motherboard vary speed from low RPM to maximum; the header’s current limit caps the top speed if it cannot deliver 0.48 A.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001034BTC
Auf Lager