Zyvpee
Zyvpee GFB0412EHS-AF57 40×56 mm 12 V 1.82 A 6-pin case fan
A 40 × 56 mm ball-bearing case fan running on 12 V at 1.82 A with a 6-pin connector, suited for server cooling
- TypeCase Fan
- Bearing TypeBall
- Power Connector6 Wires
- ColorBlack
- LEDNon-LED
- Dimensions40*56mm
- Delivers high airflow with 12 V 1.82 A power draw
- Fits tight server bays using 40 × 56 mm frame
- Ball bearing ensures long life under continuous load
- Six-wire connector enables precise speed monitoring and control
- Non-LED black design keeps rack aesthetics clean
40 × 56 mm 12 V server case fan
The Zyvpee GFB0412EHS-AF57 is a 40 by 56 millimetre DC fan built for server and compact chassis cooling. It runs on 12 volts and draws 1.82 amperes through a six-wire power connector. The ball-bearing design targets continuous duty in high-airflow environments.
Six-wire connector limits plug-and-play use
The six-pin lead carries power, ground and speed-reporting lines but does not follow a standard PWM pinout used on consumer motherboards. Builders must verify pin assignments or provide a matching header before installation. Adapters or custom wiring are often required for desktop boards.
Replaces 4056-format Delta GFB0412EHS units
This unit serves as a direct drop-in for the same 4056 frame size and 12 V 1.82 A rating when the original Delta fan reaches end of life. The upgrade is worthwhile only when the existing housing and six-pin interface match exactly.
Besonderheiten
- Delivers high airflow with 12 V 1.82 A power draw
- Fits tight server bays using 40 × 56 mm frame
- Ball bearing ensures long life under continuous load
- Six-wire connector enables precise speed monitoring and control
- Non-LED black design keeps rack aesthetics clean
Technische Daten
| Brand | 3ccooler.com |
|---|---|
| Series | GFB0412EHS -AF57 |
| Model | GFB0412EHS |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 6 Wires |
| Color | Black |
| LED | Non-LED |
| Dimensions | 40*56mm |
Fragen zu diesem Artikel
Should I pick the 40×56 mm 1.82 A version or a lower-amperage 40 mm fan for my server chassis?
Choose the 1.82 A model when the chassis fan header is rated for at least 1.82 A at 12 V; a lower-amperage fan moves less air and may not meet the thermal design of a dense 40×56 mm server slot.
What does the 1.82 A rating mean once the fan is installed in a 12 V system?
At 12 V the fan draws 1.82 A, so the motherboard header or power distribution board must supply that current continuously without voltage droop or tripping its protection circuit.
What does the 6-pin connector provide compared with a standard 4-pin PWM header?
The 6-pin plug carries 12 V power, ground, tachometer, PWM control and two additional sense or control lines; it fits server backplanes that expect the full pinout, but will not mate with a standard 4-pin desktop header.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.0000105BTC
Auf Lager