Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black standalone SD and microSD duplicator tower with one source slot and seven target slots, 16x2 LCD display

Acumen Disc

Acumen Disc SD 3.0 Elite 1:7 Duplicator AD07-SDC100

SKU CH-F7XR-YKVWR

Standalone SD and MicroSD duplicator copies one source to seven targets at up to 100 MB/s with DoD-compliant erase modes

  • TypeSD/MicroSD Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Data Source ROM1 SD Slot for Source Reading
  • Data Destination Burner7 SD Slots for SD to SD Copy
  • Display16 x 2 LCD
  • Copies to seven cards simultaneously at up to 100 MB/s
  • Two dedicated slots accept SD and MicroSD without adapters
  • Standalone operation needs no PC or software connection
  • Four erase modes include DoD 3-pass and 7-pass standards
  • Asynchronous copying lets each channel work independently from 128 MB buffer

Standalone SD and MicroSD duplicator

The Acumen Disc SD 3.0 Elite AD07-SDC100 is a standalone tower duplicator that copies one Secure Digital or MicroSD source to seven targets simultaneously. It operates without a host computer, dedicated software or any adapter, using dedicated slots for each card format. Built-in 128 MB buffer memory enables asynchronous operation so each channel copies independently at up to 100 MB per second. The unit is intended for high-volume duplication and secure sanitisation workflows.

Check card format and power supply before ordering

Verify that your source and target media are standard Secure Digital or MicroSD TF cards; other flash formats are not supported. The duplicator requires an AC supply of 115 to 230 V at 50 or 60 Hz, so confirm the local mains voltage and plug type match the unit. No computer interface or driver installation is needed, but ensure you have physical access to the front-panel LCD and slot array for operation.

Fits a secure duplication bench without a host PC

The tower design occupies a desktop footprint and provides one source slot plus seven destination slots, freeing a workstation from duplication tasks. Asynchronous copying means a new card can be inserted and started while other channels are still writing, reducing queue time. Four DoD-compliant erase modes — including 3-pass and 7-pass to the 5220.22-M standard — handle sanitisation on the same hardware, eliminating the need for a separate degausser or software tool.

Kohokohdat

  • Copies to seven cards simultaneously at up to 100 MB/s
  • Two dedicated slots accept SD and MicroSD without adapters
  • Standalone operation needs no PC or software connection
  • Four erase modes include DoD 3-pass and 7-pass standards
  • Asynchronous copying lets each channel work independently from 128 MB buffer

Tekniset tiedot

BrandAcumen Disc
TypeSD/MicroSD Duplicator
ModelAcumen Disc SD 3.0 Elite
Part NumberAD07-SDC100
Panel ColorBlack
Operating TypeStandalone
Data Source ROM1 SD Slot for Source Reading
Data Destination Burner7 SD Slots for SD to SD Copy
Display16 x 2 LCD
Target1 to 7
Buffer Memory128M
ControllerAcumen Disc
Supported MediaSecure Digital (SD) / MicroSD TF
Data Transfer Rate6GB/min
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz
Package Contentssee pictures for details

Kysymyksiä tästä tuotteesta

Does the duplicator come with SD or MicroSD cards, or do I need to supply my own?

The unit provides one source slot and seven destination slots for SD and MicroSD cards; media cards are not included and must be purchased separately.

Should I choose a duplicator with more or fewer destination slots than the seven on this model?

This model copies to seven targets simultaneously; select it if you regularly need up to seven clones per cycle, otherwise a smaller unit may suit lower volumes.

What does the 100 MB/sec per channel figure mean when I am copying cards in my workflow?

Each of the seven channels can transfer up to 100 MB/sec (6 GB/min), though actual speed varies with the media card used.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.