暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Acumen Disc

Acumen Disc SD 3.0 Elite 1:7 Duplicator AD07-SDC100

SKU CH-F7XR-YKVWR

Standalone SD and MicroSD duplicator copies one source to seven targets at up to 100 MB/s with DoD-compliant erase modes

  • TypeSD/MicroSD Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Data Source ROM1 SD Slot for Source Reading
  • Data Destination Burner7 SD Slots for SD to SD Copy
  • Display16 x 2 LCD
  • Copies to seven cards simultaneously at up to 100 MB/s
  • Two dedicated slots accept SD and MicroSD without adapters
  • Standalone operation needs no PC or software connection
  • Four erase modes include DoD 3-pass and 7-pass standards
  • Asynchronous copying lets each channel work independently from 128 MB buffer

Standalone SD and MicroSD duplicator

The Acumen Disc SD 3.0 Elite AD07-SDC100 is a standalone tower duplicator that copies one Secure Digital or MicroSD source to seven targets simultaneously. It operates without a host computer, dedicated software or any adapter, using dedicated slots for each card format. Built-in 128 MB buffer memory enables asynchronous operation so each channel copies independently at up to 100 MB per second. The unit is intended for high-volume duplication and secure sanitisation workflows.

Check card format and power supply before ordering

Verify that your source and target media are standard Secure Digital or MicroSD TF cards; other flash formats are not supported. The duplicator requires an AC supply of 115 to 230 V at 50 or 60 Hz, so confirm the local mains voltage and plug type match the unit. No computer interface or driver installation is needed, but ensure you have physical access to the front-panel LCD and slot array for operation.

Fits a secure duplication bench without a host PC

The tower design occupies a desktop footprint and provides one source slot plus seven destination slots, freeing a workstation from duplication tasks. Asynchronous copying means a new card can be inserted and started while other channels are still writing, reducing queue time. Four DoD-compliant erase modes — including 3-pass and 7-pass to the 5220.22-M standard — handle sanitisation on the same hardware, eliminating the need for a separate degausser or software tool.

特長

  • Copies to seven cards simultaneously at up to 100 MB/s
  • Two dedicated slots accept SD and MicroSD without adapters
  • Standalone operation needs no PC or software connection
  • Four erase modes include DoD 3-pass and 7-pass standards
  • Asynchronous copying lets each channel work independently from 128 MB buffer

仕様

BrandAcumen Disc
TypeSD/MicroSD Duplicator
ModelAcumen Disc SD 3.0 Elite
Part NumberAD07-SDC100
Panel ColorBlack
Operating TypeStandalone
Data Source ROM1 SD Slot for Source Reading
Data Destination Burner7 SD Slots for SD to SD Copy
Display16 x 2 LCD
Target1 to 7
Buffer Memory128M
ControllerAcumen Disc
Supported MediaSecure Digital (SD) / MicroSD TF
Data Transfer Rate6GB/min
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz
Package Contentssee pictures for details

この商品に関する質問

Does the duplicator come with SD or MicroSD cards, or do I need to supply my own?

The unit provides one source slot and seven destination slots for SD and MicroSD cards; media cards are not included and must be purchased separately.

Should I choose a duplicator with more or fewer destination slots than the seven on this model?

This model copies to seven targets simultaneously; select it if you regularly need up to seven clones per cycle, otherwise a smaller unit may suit lower volumes.

What does the 100 MB/sec per channel figure mean when I am copying cards in my workflow?

Each of the seven channels can transfer up to 100 MB/sec (6 GB/min), though actual speed varies with the media card used.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。