Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver ASIC miner with two front fans and Ethernet port

AFRNDK

AFRNDK E-AE1M 230MH/s 2000W Aleo mining hardware

SKU CH-Z90Q-5PPWF MPN E-AE1M

An ASIC miner for the Aleo blockchain delivering 230 MH/s at 2000 W with air cooling and Ethernet connectivity

  • TypeMining Machine/Miner
  • Crypto AlgorithmzkSNARK
  • Mining HardwareASIC
  • Hashrate230MH/S
  • Power Consumption2000W
  • 230 MH/s zkSNARK hashrate for Aleo mining
  • 2000 W power draw with included PSU
  • 50 dB noise level from dual-fan air cooling
  • Operates at 5–45 °C ambient temperature range
  • Accepts 200–240 V input voltage

Aleo ASIC miner for zkSNARK workloads

The AFRNDK E-AE1M is an application-specific integrated circuit built to mine Aleo using the zkSNARK algorithm. It delivers a rated hashrate of 230MH/s while drawing 2000W of power. The unit targets operators who run dedicated mining infrastructure rather than general-purpose computing.

Air-cooled chassis with dual fans and Ethernet link

The enclosure uses forced-air cooling driven by two fans and produces a noise level of 50db during operation. It connects to the network through a single Ethernet port and is rated to run in ambient temperatures from 5 to 45 °C with humidity between 5 and 95 %. The power supply accepts 200 to 240V input, so the installation must provide a circuit capable of sustaining the 2000W load.

Ships as a complete unit

The miner arrives assembled with its power supply already installed, removing the need to source or cable a separate PSU. A serial number is included for inventory tracking and manufacturer support. No additional software licences or configuration media are bundled; the device is managed through its native web interface once it receives an IP address.

Kohokohdat

  • 230 MH/s zkSNARK hashrate for Aleo mining
  • 2000 W power draw with included PSU
  • 50 dB noise level from dual-fan air cooling
  • Operates at 5–45 °C ambient temperature range
  • Accepts 200–240 V input voltage

Tekniset tiedot

BrandGold shell
SeriesE-AE1M
ModelE-AE1M
TypeMining Machine/Miner
Crypto AlgorithmzkSNARK
Mining HardwareASIC
Hashrate230MH/S
Power Consumption2000W

Kysymyksiä tästä tuotteesta

What network interface does the E-AE1M use and what practical limit does it impose?

The E-AE1M connects via Ethernet so pool latency and bandwidth are bounded by your local switch and ISP link rather than by any on-board wireless radio.

What voltage supply and circuit capacity does the E-AE1M require to fit safely in a rack or shelf?

The unit needs a 200-240 V feed and a circuit rated for at least 2000 W; verify your PDU or wall outlet can sustain that load before mounting.

How is the E-AE1M initially configured and which step do builders most often skip?

Connect the Ethernet cable, apply 200-240 V power, then reach the miner’s web UI at its DHCP address to enter pool credentials; skipping the pool setup leaves the hashrate idle.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.