We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver ASIC miner with two front fans and Ethernet port

AFRNDK

AFRNDK E-AE1M 230MH/s 2000W Aleo mining hardware

SKU CH-Z90Q-5PPWF MPN E-AE1M

An ASIC miner for the Aleo blockchain delivering 230 MH/s at 2000 W with air cooling and Ethernet connectivity

  • TypeMining Machine/Miner
  • Crypto AlgorithmzkSNARK
  • Mining HardwareASIC
  • Hashrate230MH/S
  • Power Consumption2000W
  • 230 MH/s zkSNARK hashrate for Aleo mining
  • 2000 W power draw with included PSU
  • 50 dB noise level from dual-fan air cooling
  • Operates at 5–45 °C ambient temperature range
  • Accepts 200–240 V input voltage

Aleo ASIC miner for zkSNARK workloads

The AFRNDK E-AE1M is an application-specific integrated circuit built to mine Aleo using the zkSNARK algorithm. It delivers a rated hashrate of 230MH/s while drawing 2000W of power. The unit targets operators who run dedicated mining infrastructure rather than general-purpose computing.

Air-cooled chassis with dual fans and Ethernet link

The enclosure uses forced-air cooling driven by two fans and produces a noise level of 50db during operation. It connects to the network through a single Ethernet port and is rated to run in ambient temperatures from 5 to 45 °C with humidity between 5 and 95 %. The power supply accepts 200 to 240V input, so the installation must provide a circuit capable of sustaining the 2000W load.

Ships as a complete unit

The miner arrives assembled with its power supply already installed, removing the need to source or cable a separate PSU. A serial number is included for inventory tracking and manufacturer support. No additional software licences or configuration media are bundled; the device is managed through its native web interface once it receives an IP address.

Highlights

  • 230 MH/s zkSNARK hashrate for Aleo mining
  • 2000 W power draw with included PSU
  • 50 dB noise level from dual-fan air cooling
  • Operates at 5–45 °C ambient temperature range
  • Accepts 200–240 V input voltage

Specifications

BrandGold shell
SeriesE-AE1M
ModelE-AE1M
TypeMining Machine/Miner
Crypto AlgorithmzkSNARK
Mining HardwareASIC
Hashrate230MH/S
Power Consumption2000W

Questions about this item

What network interface does the E-AE1M use and what practical limit does it impose?

The E-AE1M connects via Ethernet so pool latency and bandwidth are bounded by your local switch and ISP link rather than by any on-board wireless radio.

What voltage supply and circuit capacity does the E-AE1M require to fit safely in a rack or shelf?

The unit needs a 200-240 V feed and a circuit rated for at least 2000 W; verify your PDU or wall outlet can sustain that load before mounting.

How is the E-AE1M initially configured and which step do builders most often skip?

Connect the Ethernet cable, apply 200-240 V power, then reach the miner’s web UI at its DHCP address to enter pool credentials; skipping the pool setup leaves the hashrate idle.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.