NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
AFRNDK
An ASIC miner for the Aleo blockchain delivering 230 MH/s at 2000 W with air cooling and Ethernet connectivity
The AFRNDK E-AE1M is an application-specific integrated circuit built to mine Aleo using the zkSNARK algorithm. It delivers a rated hashrate of 230MH/s while drawing 2000W of power. The unit targets operators who run dedicated mining infrastructure rather than general-purpose computing.
The enclosure uses forced-air cooling driven by two fans and produces a noise level of 50db during operation. It connects to the network through a single Ethernet port and is rated to run in ambient temperatures from 5 to 45 °C with humidity between 5 and 95 %. The power supply accepts 200 to 240V input, so the installation must provide a circuit capable of sustaining the 2000W load.
The miner arrives assembled with its power supply already installed, removing the need to source or cable a separate PSU. A serial number is included for inventory tracking and manufacturer support. No additional software licences or configuration media are bundled; the device is managed through its native web interface once it receives an IP address.
| Brand | Gold shell |
|---|---|
| Series | E-AE1M |
| Model | E-AE1M |
| Type | Mining Machine/Miner |
| Crypto Algorithm | zkSNARK |
| Mining Hardware | ASIC |
| Hashrate | 230MH/S |
| Power Consumption | 2000W |
The E-AE1M connects via Ethernet so pool latency and bandwidth are bounded by your local switch and ISP link rather than by any on-board wireless radio.
The unit needs a 200-240 V feed and a circuit rated for at least 2000 W; verify your PDU or wall outlet can sustain that load before mounting.
Connect the Ethernet cable, apply 200-240 V power, then reach the miner’s web UI at its DHCP address to enter pool credentials; skipping the pool setup leaves the hashrate idle.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?