NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
AFRNDK
An ASIC miner for the Aleo blockchain delivering 230 MH/s at 2000 W with air cooling and Ethernet connectivity
The AFRNDK E-AE1M is an application-specific integrated circuit built to mine Aleo using the zkSNARK algorithm. It delivers a rated hashrate of 230MH/s while drawing 2000W of power. The unit targets operators who run dedicated mining infrastructure rather than general-purpose computing.
The enclosure uses forced-air cooling driven by two fans and produces a noise level of 50db during operation. It connects to the network through a single Ethernet port and is rated to run in ambient temperatures from 5 to 45 °C with humidity between 5 and 95 %. The power supply accepts 200 to 240V input, so the installation must provide a circuit capable of sustaining the 2000W load.
The miner arrives assembled with its power supply already installed, removing the need to source or cable a separate PSU. A serial number is included for inventory tracking and manufacturer support. No additional software licences or configuration media are bundled; the device is managed through its native web interface once it receives an IP address.
| Brand | Gold shell |
|---|---|
| Series | E-AE1M |
| Model | E-AE1M |
| Type | Mining Machine/Miner |
| Crypto Algorithm | zkSNARK |
| Mining Hardware | ASIC |
| Hashrate | 230MH/S |
| Power Consumption | 2000W |
The E-AE1M connects via Ethernet so pool latency and bandwidth are bounded by your local switch and ISP link rather than by any on-board wireless radio.
The unit needs a 200-240 V feed and a circuit rated for at least 2000 W; verify your PDU or wall outlet can sustain that load before mounting.
Connect the Ethernet cable, apply 200-240 V power, then reach the miner’s web UI at its DHCP address to enter pool credentials; skipping the pool setup leaves the hashrate idle.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?