Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White full-tower PC case with tempered glass side panels, four 140 mm fans and metal GPU holder

Corn Electronics

Corn Electronics GR701 E-ATX full tower PC case, Gundam White

SKU CH-AK1S-3P8DQ

Full-tower E-ATX chassis with dual 420 mm radiator mounts, four pre-installed 140 mm PWM fans, metal GPU holder and front USB 4.0 Type-C plus 60 W fast-charge port

  • TypeATX Full Tower

Options Gundam (White)

Näytä 48 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Supports E-ATX motherboards up to 12 by 10.9 inches
  • Dual 420 mm radiator mounts front and top for high-capacity liquid cooling
  • Four pre-installed 140 mm PWM fans deliver strong airflow out of the box
  • Metal GPU holder and vertical-mount brackets secure heavy graphics cards up to 460 mm
  • Front USB 3.2 Gen2 Type-C and USB 4.0 Type-C ports provide fast peripheral connectivity

Case identity

The Corn Electronics GR701 is an E-ATX full-tower chassis finished in Gundam White with UV-printed panels that resist fading. It targets builders who want a showcase enclosure with dual tempered-glass sides, extensive radiator support and a built-in GPU holder for heavy graphics cards. Custom artwork can be ordered from the manufacturer, but the made-to-order nature means the purchase is final once production begins.

Build compatibility

Verify that your motherboard fits the 12 by 10.9 inch E-ATX maximum, and that your CPU cooler stays within the 190 mm height limit. Graphics cards up to 460 mm long are supported, while the power supply can be up to 240 mm deep. Drive bays provide five 2.5 inch slots and two combined 2.5 or 3.5 inch positions, and the rear offers nine standard plus three vertical expansion slots. Front I/O includes USB 3.2 Gen 1, USB 3.2 Gen 2 Type-C and a USB 4.0 or 3.2 Gen 2x2 Type-C port that may vary by region.

Thermal profile

Four 140 mm PWM fans are pre-installed, three at the front and one at the rear, and the case accepts up to 420 mm radiators at both front and top. Removable dust filters cover front, top and bottom intakes to keep airflow clean. Cable routing space behind the motherboard tray measures 34 mm, helping maintain tidy airflow paths. The steel-and-glass construction weighs 20.8 kg, so ensure your work surface and floor can handle the mass during assembly and moves.

Kohokohdat

  • Supports E-ATX motherboards up to 12 by 10.9 inches
  • Dual 420 mm radiator mounts front and top for high-capacity liquid cooling
  • Four pre-installed 140 mm PWM fans deliver strong airflow out of the box
  • Metal GPU holder and vertical-mount brackets secure heavy graphics cards up to 460 mm
  • Front USB 3.2 Gen2 Type-C and USB 4.0 Type-C ports provide fast peripheral connectivity

Tekniset tiedot

Modelinternational version
TypeATX Full Tower

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the GR701 include fans or a radiator, and what must I buy separately?

The case ships with four 140 mm PWM fans pre-installed at the front and rear. Radiators are not included; you can add up to 420 mm units at the front or top and a 140 mm unit at the rear.

Which front-panel USB-C variant should I select for my motherboard header?

The I/O panel provides either a USB 4.0 Type-C or a USB 3.2 Gen 2x2 Type-C port depending on the regional version; choose the one that matches your motherboard’s internal header.

Will a 460 mm graphics card and a 240 mm power supply fit together with the included metal GPU holder?

Yes. The case supports graphics cards up to 460 mm long and power supplies up to 240 mm long, and the bundled metal holder secures the card without reducing those clearances.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.