Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Full-tower E-ATX case in Kuromi-White finish with tempered glass side panels and four pre-installed 140 mm fans

Corn Electronics

Corn Electronics GR701 E-ATX PC case 420 mm radiator Kuromi-White

SKU CH-KHZB-ADK6C

E-ATX full-tower chassis with dual 420 mm radiator mounts, four 140 mm PWM fans, metal GPU holder, component storage and front USB 4.0 Type-C

  • TypeATX Full Tower

Options Kuromi

Näytä 48 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • E-ATX motherboard support up to 12 by 10.9 inches
  • Front and top radiator support up to 420 mm
  • Four pre-installed 140 mm PWM fans included
  • Metal GPU holder and vertical slots for heavy cards
  • Front I/O with USB 3.2 Gen2 Type C and USB 4.0 Type C

Full-tower case for custom builders

The Corn Electronics GR701 is an E-ATX full-tower chassis designed for enthusiasts who want extensive radiator support and a distinctive Kuromi-White finish. It accommodates motherboards up to 12 by 10.9 inches and graphics cards up to 460 mm long. The case includes a metal GPU holder and dedicated component storage for a tidy internal layout.

Dual 420 mm radiator mounts and pre-installed fans

Front and top panels each accept radiators up to 420 mm, while the rear supports 120 mm or 140 mm units. Three 140 mm PWM fans come fitted at the front and one at the rear, providing high airflow with speed control. Removable dust filters on front, top and bottom help maintain clean intake paths under load.

ARGB hub and 60 W USB charging

A built-in ARGB fan hub simplifies lighting synchronisation across the pre-installed fans. The front I/O panel adds a USB 4.0 or USB 3.2 Gen 2x2 Type-C port capable of 60 W fast charging alongside four USB 3.2 Gen 1 ports and audio jacks. Builders who need more than five 2.5-inch drive bays or a slimmer profile should consider other models.

Kohokohdat

  • E-ATX motherboard support up to 12 by 10.9 inches
  • Front and top radiator support up to 420 mm
  • Four pre-installed 140 mm PWM fans included
  • Metal GPU holder and vertical slots for heavy cards
  • Front I/O with USB 3.2 Gen2 Type C and USB 4.0 Type C

Tekniset tiedot

Modelinternational version
TypeATX Full Tower

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I mount the four pre-installed 140 mm PWM fans and the 420 mm radiator in the front without blocking the drive bays?

Install the three front 140 mm fans first, then attach the 420 mm radiator to the front brackets; the 5 × 2.5″ and 2 × 2.5″/3.5″ combo bays sit behind the motherboard tray so they stay accessible.

Which dust filters need regular cleaning and how are they removed?

Magnetic filters on the front, top and bottom panels pull off without tools; clean them every few months to keep airflow to the three front 140 mm fans and top radiator unrestricted.

What thermal limit appears first when running a 420 mm radiator with the three front 140 mm fans at full load?

The 190 mm maximum CPU cooler height caps the radiator-and-fan stack at the top, so a thick 420 mm radiator plus fans can hit that ceiling before the GPU length or PSU limits are reached.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.