Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Full-tower case in bright yellow with Naruto graphics, dual tempered-glass panels, four 140 mm fans pre-installed

Corn Electronics

Corn Electronics GR701 Naruto Yellow PC case

SKU CH-HNGK-CTPQD

Full-tower ATX case supporting E-ATX boards, dual 420 mm radiators, four pre-installed 140 mm fans, a metal GPU holder and 60 W fast-charge USB-C

  • TypeATX Full Tower

Options NARUTO

Näytä 48 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • E-ATX motherboard support enables large builds
  • Dual 420 mm radiator mounts for extreme cooling
  • Four pre-installed 140 mm PWM fans included
  • Metal GPU holder prevents graphics card sag
  • 60 W fast-charge USB Type-C on front panel

Case layout and audience

The Corn Electronics GR701 Naruto Yellow is a full-tower ATX case built for custom-loop or high-airflow builds that need EATX motherboard support and heavy GPU clearance. It targets enthusiasts who want a distinctive yellow theme with factory UV printing and a metal GPU holder included.

Sustained thermal behaviour

Front and top mounts each accept up to 420 mm radiators or three 140 mm fans, while the rear takes a single 140 mm unit. Four 140 mm PWM fans come pre-installed, giving strong baseline airflow before any extra radiators are added. Dust filters on front, top and bottom are removable for cleaning without breaking the loop.

Installation practicalities

The chassis measures 268 by 639 by 659 mm and weighs 20.8 kg, so two people should position it. Cable routing space behind the tray is 34 mm. Drive bays include five 2.5 inch slots and two combo 2.5/3.5 inch bays. Front I/O provides USB 3.2 Gen 1, USB 3.2 Gen 2 Type C, a USB 4.0 or 3.2 Gen 2x2 Type C port depending on region, audio combo jack, LED control and reset button. Buyers who need a lighter case for frequent moves or a smaller footprint for compact desks should look elsewhere.

Kohokohdat

  • E-ATX motherboard support enables large builds
  • Dual 420 mm radiator mounts for extreme cooling
  • Four pre-installed 140 mm PWM fans included
  • Metal GPU holder prevents graphics card sag
  • 60 W fast-charge USB Type-C on front panel

Tekniset tiedot

Modelinternational version
TypeATX Full Tower

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much heat can the front-mounted 420 mm radiator dissipate during sustained all-day loads?

The front panel supports radiators up to 420 mm, matching the top panel, so a large liquid-cooling loop can exhaust heat directly through both surfaces.

Which power connectors must my PSU provide for the pre-installed 140 mm PWM fans and the front-panel USB 4.0 Type-C port?

Four 140 mm PWM fans ship installed and connect to standard 4-pin fan headers, while the front USB 4.0 Type-C port draws power from the motherboard's internal USB header.

Will my existing E-ATX board measuring 12 by 10.9 inches fit alongside a 460 mm graphics card and 240 mm power supply?

The case accepts E-ATX boards up to 12 by 10.9 inches, clears GPUs to 460 mm and PSUs to 240 mm, so that combination fits with 34 mm of cable-management space behind the tray.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.