Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Full-tower case in bright yellow with Naruto graphics, dual tempered-glass panels, four 140 mm fans pre-installed

Corn Electronics

Corn Electronics GR701 Naruto Yellow PC case

SKU CH-HNGK-CTPQD

Full-tower ATX case supporting E-ATX boards, dual 420 mm radiators, four pre-installed 140 mm fans, a metal GPU holder and 60 W fast-charge USB-C

  • TypeATX Full Tower

Options NARUTO

Zobrazit dalších 48 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • E-ATX motherboard support enables large builds
  • Dual 420 mm radiator mounts for extreme cooling
  • Four pre-installed 140 mm PWM fans included
  • Metal GPU holder prevents graphics card sag
  • 60 W fast-charge USB Type-C on front panel

Case layout and audience

The Corn Electronics GR701 Naruto Yellow is a full-tower ATX case built for custom-loop or high-airflow builds that need EATX motherboard support and heavy GPU clearance. It targets enthusiasts who want a distinctive yellow theme with factory UV printing and a metal GPU holder included.

Sustained thermal behaviour

Front and top mounts each accept up to 420 mm radiators or three 140 mm fans, while the rear takes a single 140 mm unit. Four 140 mm PWM fans come pre-installed, giving strong baseline airflow before any extra radiators are added. Dust filters on front, top and bottom are removable for cleaning without breaking the loop.

Installation practicalities

The chassis measures 268 by 639 by 659 mm and weighs 20.8 kg, so two people should position it. Cable routing space behind the tray is 34 mm. Drive bays include five 2.5 inch slots and two combo 2.5/3.5 inch bays. Front I/O provides USB 3.2 Gen 1, USB 3.2 Gen 2 Type C, a USB 4.0 or 3.2 Gen 2x2 Type C port depending on region, audio combo jack, LED control and reset button. Buyers who need a lighter case for frequent moves or a smaller footprint for compact desks should look elsewhere.

Přednosti

  • E-ATX motherboard support enables large builds
  • Dual 420 mm radiator mounts for extreme cooling
  • Four pre-installed 140 mm PWM fans included
  • Metal GPU holder prevents graphics card sag
  • 60 W fast-charge USB Type-C on front panel

Specifikace

Modelinternational version
TypeATX Full Tower

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How much heat can the front-mounted 420 mm radiator dissipate during sustained all-day loads?

The front panel supports radiators up to 420 mm, matching the top panel, so a large liquid-cooling loop can exhaust heat directly through both surfaces.

Which power connectors must my PSU provide for the pre-installed 140 mm PWM fans and the front-panel USB 4.0 Type-C port?

Four 140 mm PWM fans ship installed and connect to standard 4-pin fan headers, while the front USB 4.0 Type-C port draws power from the motherboard's internal USB header.

Will my existing E-ATX board measuring 12 by 10.9 inches fit alongside a 460 mm graphics card and 240 mm power supply?

The case accepts E-ATX boards up to 12 by 10.9 inches, clears GPUs to 460 mm and PSUs to 240 mm, so that combination fits with 34 mm of cable-management space behind the tray.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.