Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Full-tower E-ATX case in Banshee Yellow with dual tempered glass panels and four 140 mm fans pre-installed

Corn Electronics

Corn Electronics GR701 E-ATX PC case Banshee Yellow

SKU CH-T013-N642Y

Full-tower E-ATX case with dual 420 mm radiator support, four pre-installed 140 mm PWM fans, vertical GPU mount and 60 W USB-C charging

  • TypeATX Full Tower

Options Banshee

Zobrazit dalších 48 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • E-ATX motherboard support fits 12 by 10.9 inch boards
  • Dual 420 mm radiator mounts front and top for heavy cooling
  • Four pre-installed 140 mm PWM fans move air out of the box
  • Metal GPU holder secures cards up to 460 mm long
  • Front USB 4.0 Type C plus 60 W fast charging powers devices quickly

Full-tower E-ATX case in Banshee Yellow

This Corn Electronics GR701 chassis supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards up to twelve by ten point nine inches. It ships with four 140 mm PWM fans pre-installed and includes a metal GPU holder plus dedicated component storage. The yellow UV-printed finish is designed to resist colour fading over time.

Suits high-airflow liquid-cooling builds.

Front and top mounts each accept radiators up to 420 mm while the rear takes 120 mm or 140 mm units. Nine horizontal slots plus three vertical positions give plenty of room for long graphics cards. Builders needing a smaller footprint or lighter case should consider other form factors.

460 mm maximum graphics-card length decides fit

The interior clears GPUs up to 460 mm long and CPU coolers up to 190 mm tall. Cable-routing depth behind the motherboard tray measures 34 mm. Removable dust filters cover front, top and bottom intakes for easy maintenance.

Přednosti

  • E-ATX motherboard support fits 12 by 10.9 inch boards
  • Dual 420 mm radiator mounts front and top for heavy cooling
  • Four pre-installed 140 mm PWM fans move air out of the box
  • Metal GPU holder secures cards up to 460 mm long
  • Front USB 4.0 Type C plus 60 W fast charging powers devices quickly

Specifikace

Modelinternational version
TypeATX Full Tower

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How often should I clean the removable dust filters on the front, top and bottom panels?

The front, top and bottom filters slide out for cleaning; vacuum or rinse them every few months depending on room dust levels to keep airflow through the 140 mm fans unrestricted.

With four 140 mm PWM fans running continuously, what thermal limit is reached first — CPU cooler clearance or GPU length?

The CPU cooler height is capped at 190 mm and the GPU length at 460 mm; sustained loads will hit the cooler-height ceiling before the graphics-card length limit becomes a factor.

How much heat and noise do the four pre-installed 140 mm PWM fans produce when the system runs all day?

Four 140 mm PWM fans move large volumes of air at lower RPM, so the case stays cool with a moderate hum that is noticeable but not intrusive during 24/7 operation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.