Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Full-tower case in bright yellow with Naruto graphics, dual tempered-glass panels, four 140 mm fans pre-installed

Corn Electronics

Corn Electronics GR701 Naruto Yellow PC case

SKU CH-HNGK-CTPQD

Full-tower ATX case supporting E-ATX boards, dual 420 mm radiators, four pre-installed 140 mm fans, a metal GPU holder and 60 W fast-charge USB-C

  • TypeATX Full Tower

Options NARUTO

Visa 48 fler konfigurationer

Genomstrukna varianter finns, men är inte i lager här.

  • E-ATX motherboard support enables large builds
  • Dual 420 mm radiator mounts for extreme cooling
  • Four pre-installed 140 mm PWM fans included
  • Metal GPU holder prevents graphics card sag
  • 60 W fast-charge USB Type-C on front panel

Case layout and audience

The Corn Electronics GR701 Naruto Yellow is a full-tower ATX case built for custom-loop or high-airflow builds that need EATX motherboard support and heavy GPU clearance. It targets enthusiasts who want a distinctive yellow theme with factory UV printing and a metal GPU holder included.

Sustained thermal behaviour

Front and top mounts each accept up to 420 mm radiators or three 140 mm fans, while the rear takes a single 140 mm unit. Four 140 mm PWM fans come pre-installed, giving strong baseline airflow before any extra radiators are added. Dust filters on front, top and bottom are removable for cleaning without breaking the loop.

Installation practicalities

The chassis measures 268 by 639 by 659 mm and weighs 20.8 kg, so two people should position it. Cable routing space behind the tray is 34 mm. Drive bays include five 2.5 inch slots and two combo 2.5/3.5 inch bays. Front I/O provides USB 3.2 Gen 1, USB 3.2 Gen 2 Type C, a USB 4.0 or 3.2 Gen 2x2 Type C port depending on region, audio combo jack, LED control and reset button. Buyers who need a lighter case for frequent moves or a smaller footprint for compact desks should look elsewhere.

I korthet

  • E-ATX motherboard support enables large builds
  • Dual 420 mm radiator mounts for extreme cooling
  • Four pre-installed 140 mm PWM fans included
  • Metal GPU holder prevents graphics card sag
  • 60 W fast-charge USB Type-C on front panel

Specifikationer

Modelinternational version
TypeATX Full Tower

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How much heat can the front-mounted 420 mm radiator dissipate during sustained all-day loads?

The front panel supports radiators up to 420 mm, matching the top panel, so a large liquid-cooling loop can exhaust heat directly through both surfaces.

Which power connectors must my PSU provide for the pre-installed 140 mm PWM fans and the front-panel USB 4.0 Type-C port?

Four 140 mm PWM fans ship installed and connect to standard 4-pin fan headers, while the front USB 4.0 Type-C port draws power from the motherboard's internal USB header.

Will my existing E-ATX board measuring 12 by 10.9 inches fit alongside a 460 mm graphics card and 240 mm power supply?

The case accepts E-ATX boards up to 12 by 10.9 inches, clears GPUs to 460 mm and PSUs to 240 mm, so that combination fits with 34 mm of cable-management space behind the tray.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.