Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

Corn Electronics

Corn Electronics GR701 E-ATX PC case Shana of the Blazing Eyes-Red

SKU CH-0E3Y-Z0VTB

Full-tower E-ATX case with dual 420 mm radiator mounts, four pre-installed 140 mm PWM fans, vertical GPU bracket, and 60 W USB-C fast-charge port

  • TypeATX Full Tower
  • E-ATX motherboard support up to 12 by 10.9 inches
  • Dual 420 mm radiator mounts front and top for heavy cooling
  • Four 140 mm PWM fans pre-installed for strong airflow
  • Metal GPU holder included to prevent sag on long cards
  • 60 W fast-charge USB Type-C port on front I/O

Build foundation

The GR701 E-ATX full-tower chassis supports motherboards up to 12 by 10.9 inches, covering E-ATX, ATX, Micro-ATX and Mini-ITX. It targets builders who want a single enclosure for high-end air or liquid cooling and lengthy graphics cards without needing a second case. The 34 millimetre cable routing depth and removable filters on three sides keep internal layouts clean for long-term maintenance.

Cooling headroom

Front and top mounts each accept radiators up to 420 millimetres or three 140 millimetre fans, while the rear takes a 140 millimetre unit. Four 140 millimetre PWM fans ship pre-installed, delivering strong airflow immediately. CPU coolers up to 190 millimetres and graphics cards up to 460 millimetres fit comfortably, but dual 420 millimetre radiators front and top will exceed the front-to-rear clearance for the thickest pump blocks.

Included extras

A metal GPU holder prevents sag on heavy cards, and the integrated ARGB fan hub centralises lighting control via the front LED button. The front panel provides a USB 4.0 or USB 3.2 Gen 2x2 Type-C port, four USB 3.2 Gen 1 ports, audio combo jack and reset switch, while a 60 watt fast-charge circuit powers phones or tablets directly. Drive cages hold five 2.5 inch bays and two combo 2.5 or 3.5 inch bays for mixed storage arrays.

I korthet

  • E-ATX motherboard support up to 12 by 10.9 inches
  • Dual 420 mm radiator mounts front and top for heavy cooling
  • Four 140 mm PWM fans pre-installed for strong airflow
  • Metal GPU holder included to prevent sag on long cards
  • 60 W fast-charge USB Type-C port on front I/O

Specifikationer

Modelinternational version
TypeATX Full Tower

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will my existing 280 mm front radiator and 140 mm rear fan fit in this GR701 case?

Yes, the front supports 280 mm radiators and the rear supports 140 mm fans or a 120 mm radiator.

How can I confirm the ARGB lighting and fan hub are working after I build in the GR701?

Press the LED control button on the front I/O to cycle lighting modes and check that all four pre-installed 140 mm PWM fans spin up.

Does the GR701 come with the four 140 mm PWM fans already installed, and do I need to buy any drive caddies separately?

Three 140 mm PWM fans are pre-installed at the front and one at the rear; the case includes bays for five 2.5" drives and two 2.5"/3.5" combo drives without extra caddies.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.