Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Full-tower E-ATX case in red with tempered glass side panels and UV-printed anime artwork

Corn Electronics

Corn Electronics GR701 E-ATX PC case Shana of the Blazing Eyes-Red

SKU CH-0E3Y-Z0VTB

Full-tower E-ATX case with dual 420 mm radiator mounts, four pre-installed 140 mm PWM fans, vertical GPU bracket, and 60 W USB-C fast-charge port

  • TypeATX Full Tower

Options Shana

Ver as outras 48 configurações

As versões riscadas existem, mas não estão disponíveis aqui.

  • E-ATX motherboard support up to 12 by 10.9 inches
  • Dual 420 mm radiator mounts front and top for heavy cooling
  • Four 140 mm PWM fans pre-installed for strong airflow
  • Metal GPU holder included to prevent sag on long cards
  • 60 W fast-charge USB Type-C port on front I/O

Build foundation

The GR701 E-ATX full-tower chassis supports motherboards up to 12 by 10.9 inches, covering E-ATX, ATX, Micro-ATX and Mini-ITX. It targets builders who want a single enclosure for high-end air or liquid cooling and lengthy graphics cards without needing a second case. The 34 millimetre cable routing depth and removable filters on three sides keep internal layouts clean for long-term maintenance.

Cooling headroom

Front and top mounts each accept radiators up to 420 millimetres or three 140 millimetre fans, while the rear takes a 140 millimetre unit. Four 140 millimetre PWM fans ship pre-installed, delivering strong airflow immediately. CPU coolers up to 190 millimetres and graphics cards up to 460 millimetres fit comfortably, but dual 420 millimetre radiators front and top will exceed the front-to-rear clearance for the thickest pump blocks.

Included extras

A metal GPU holder prevents sag on heavy cards, and the integrated ARGB fan hub centralises lighting control via the front LED button. The front panel provides a USB 4.0 or USB 3.2 Gen 2x2 Type-C port, four USB 3.2 Gen 1 ports, audio combo jack and reset switch, while a 60 watt fast-charge circuit powers phones or tablets directly. Drive cages hold five 2.5 inch bays and two combo 2.5 or 3.5 inch bays for mixed storage arrays.

Pontos fortes

  • E-ATX motherboard support up to 12 by 10.9 inches
  • Dual 420 mm radiator mounts front and top for heavy cooling
  • Four 140 mm PWM fans pre-installed for strong airflow
  • Metal GPU holder included to prevent sag on long cards
  • 60 W fast-charge USB Type-C port on front I/O

Especificações

Modelinternational version
TypeATX Full Tower

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Will my existing 280 mm front radiator and 140 mm rear fan fit in this GR701 case?

Yes, the front supports 280 mm radiators and the rear supports 140 mm fans or a 120 mm radiator.

How can I confirm the ARGB lighting and fan hub are working after I build in the GR701?

Press the LED control button on the front I/O to cycle lighting modes and check that all four pre-installed 140 mm PWM fans spin up.

Does the GR701 come with the four 140 mm PWM fans already installed, and do I need to buy any drive caddies separately?

Three 140 mm PWM fans are pre-installed at the front and one at the rear; the case includes bays for five 2.5" drives and two 2.5"/3.5" combo drives without extra caddies.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.