Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Full-tower E-ATX case in Kirby-Pink with dual tempered glass panels, four 140 mm fans and metal GPU holder

Corn Electronics

Corn Electronics GR701 E-ATX PC case Kirby-Pink

SKU CH-57QN-X63FT

Full-tower E-ATX case with dual 420 mm radiator mounts, four pre-installed 140 mm PWM fans, a metal GPU holder and 60 W USB-C fast charging in a Kirby-Pink finish

  • TypeATX Full Tower

Options Kirby

Näytä 48 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • E-ATX motherboard support fits 12 inch by 10.9 inch boards
  • Dual 420 mm radiator mounts front and top for high-capacity liquid cooling
  • Four pre-installed 140 mm PWM fans deliver strong airflow out of the box
  • Metal GPU holder secures cards up to 460 mm length
  • Front I/O includes USB 3.2 Gen 2 Type-C and USB 4.0 or 3.2 Gen 2x2 Type-C

Built for E-ATX builders

The GR701 is a full-tower chassis that accepts E-ATX boards up to 12 by 10.9 inches plus standard ATX, Micro-ATX and Mini-ITX. It ships with four 140 mm PWM fans already mounted and includes a metal GPU holder plus dedicated component storage. The Kirby-Pink finish uses UV printing that resists fading.

Upgrade from mid-tower limits

Builders constrained by shorter GPU clearance or smaller radiator mounts gain 460 mm graphics-card length and 420 mm dual-radiator support at both front and top. The jump is worth it when a 360 mm or 420 mm loop is required and the current case maxes out at 280 mm or 360 mm. Nine horizontal slots plus three vertical slots also free up space for extra add-in cards.

Straightforward assembly with weight caveats

Removable dust filters on front, top and bottom simplify cleaning while 34 mm of cable-management depth eases routing. The tempered glass panels on both sides lift off for access, but the 20.8 kg mass demands two-person handling and a sturdy surface. Ensure the chosen power supply stays within the 240 mm length limit and the CPU cooler does not exceed 190 mm height.

Kohokohdat

  • E-ATX motherboard support fits 12 inch by 10.9 inch boards
  • Dual 420 mm radiator mounts front and top for high-capacity liquid cooling
  • Four pre-installed 140 mm PWM fans deliver strong airflow out of the box
  • Metal GPU holder secures cards up to 460 mm length
  • Front I/O includes USB 3.2 Gen 2 Type-C and USB 4.0 or 3.2 Gen 2x2 Type-C

Tekniset tiedot

Modelinternational version
TypeATX Full Tower

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What motherboard form factors fit the GR701 E-ATX case?

The case supports E-ATX up to 12 by 10.9 inches, ATX, Micro-ATX and Mini-ITX motherboards.

How do I install the pre-installed 140 mm PWM fans and the ARGB fan hub?

The three front and one rear 140 mm PWM fans come pre-mounted; connect their PWM and ARGB cables to the included hub, then link the hub to a motherboard 5 V ARGB header and a fan header.

When should I clean the removable dust filters on this case?

Remove and clean the front, top and bottom filters every few months or when airflow drops, using compressed air or a rinse with water and full drying before refitting.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.