Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Square grey thermal pad, 120 by 120 by 2.0 mm, soft flexible sheet

Lirealar

Lirealar 120x120mm thermal pad 12.8 W/mK 2.0mm 15g

SKU CH-SXGA-N8AY9 MPN 120x120mm

A 120 × 120 mm, 2.0 mm thick silicone thermal pad rated at 12.8 W/mK that fills gaps between CPUs, GPUs or LED coolers and heatsinks while remaining electrically non-conductive and reusable

  • Volume / Net Weight15g
  • Thermal Conductivity12.8 W/mK,
  • Long Term Operating Temperature-40 C to +400C
  • SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/c
  • FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi

Type Thermal Pad

Model 120x120mm

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

Specification 2.0mm

Näytä 1 muuta kokoonpanoa
  • High 12.8 W/mK conductivity moves heat fast from CPU or GPU
  • 0 mm thickness fills uneven gaps between chip and heatsink
  • Non-conductive insulation prevents short circuits on dense circuit boards
  • Operates from -40 °C to 200 °C for long-term stability in laptops and desktops
  • Soft 30-55 Shore C hardness compresses easily and can be reused during maintenance

Gap-filling thermal pad for CPUs GPUs

This 120x120mm silicone pad sits between a heat source and a heatsink to eliminate air gaps that impede heat flow. Its 12.8 W/mK conductivity suits desktop and laptop processors graphics cards and LED modules. The material is non-conductive non-corrosive and non-toxic.

Peel-and-place installation with natural viscosity

The pad ships as a single 2.0mm thick sheet weighing 15g that can be cut to shape if needed. Natural tack holds it in place during assembly and allows repositioning or reuse. Non-curing compound means no mess and no drying time.

Verify gap thickness and surface flatness before

Measure the distance between your component and heatsink to confirm a 2.0mm pad will compress correctly without excessive force. Ensure mounting pressure can achieve the 30-55 Shore C hardness range for optimal contact. Check that operating temperatures stay within the -40C to 200C continuous range.

Kohokohdat

  • High 12.8 W/mK conductivity moves heat fast from CPU or GPU
  • 0 mm thickness fills uneven gaps between chip and heatsink
  • Non-conductive insulation prevents short circuits on dense circuit boards
  • Operates from -40 °C to 200 °C for long-term stability in laptops and desktops
  • Soft 30-55 Shore C hardness compresses easily and can be reused during maintenance

Tekniset tiedot

SeriesThermal Pad
Model120x120x2.0mm
Volume / Net Weight15g
Thermal Conductivity12.8 W/mK,
Long Term Operating Temperature-40 C to +400C
SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/cc Hardness:30-55(Sc) Breakdown Voltage:>9.8KV(1mm) Temperature Range:-40°C~200°C
FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi One Pad , multi-purpose, durable,insulated, non-conductive lnsulation does not conduct electricity and is safe for use Natural viscosity, easy to assemble and reusable

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I verify the Lirealar thermal pad is performing correctly after installation?

Check that component temperatures drop under load and the pad remains intact without curing or shifting, confirming its 12.8 W/mK conductivity is bridging the gap effectively.

What exactly is included with the 120x120mm pad and do I need any extra materials?

The package contains one 15 g gray silicone pad measuring 120 x 120 x 2.0 mm; no additional compounds or adhesives are required for installation.

Which thickness and size variant should I select for my GPU or CPU heatsink gap?

Choose the 2.0 mm thick 120 x 120 mm version when your heat-sink gap matches those dimensions; it covers a 120 mm square area and compresses to fill uneven surfaces.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.