Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR5 5600 CL46 1Rx8 1.1V UDIMM Supermicro X13SAW-TLN4F memory upgrade

SKU CH-E0WZ-ZKZH8

16 GB dual-channel DDR5 kit (2 × 8 GB) rated at 5600 MHz, CL46, 1.1 V, 288-pin UDIMM, validated for the Supermicro X13SAW-TLN4F motherboard

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • 16 GB kit adds capacity for multitasking with two 8 GB modules
  • DDR5 5600 speed matches board specification for rated performance
  • CL46 latency and 1.10 V voltage align with memory controller expectations
  • 1Rx8 unbuffered UDIMM form factor fits Supermicro X13SAW-TLN4F slot requirements
  • Major OEM chips from Samsung Micron Hynix tested for stability at rated settings

Exact-fit DDR5 upgrade

This 16 GB kit (2 x 8 GB) is built for the Supermicro X13SAW-TLN4F motherboard. It delivers DDR5-5600 (PC5-44800) speed at 1.1 V with CL46 timing. The 1Rx8 rank and unbuffered, non-ECC design match the board's memory controller exactly.

Plain 288-pin UDIMM modules

The sticks use standard 288-pin DDR5 UDIMM connectors and have no heat spreader, so they fit tight DIMM slots without clearance issues. Major OEM chips from Samsung, Micron or Hynix are tested at rated voltage and timing for stable daily operation. No ECC or registered circuitry means they install like ordinary desktop memory.

1Rx8 rank at 1.1 V

The single-rank-per-module layout at 1.1 V is the specification that decides compatibility. If your board requires a different rank structure or voltage, this kit will not be recognised at full capacity or speed. Check the motherboard manual for approved DIMM population order before buying.

Kohokohdat

  • 16 GB kit adds capacity for multitasking with two 8 GB modules
  • DDR5 5600 speed matches board specification for rated performance
  • CL46 latency and 1.10 V voltage align with memory controller expectations
  • 1Rx8 unbuffered UDIMM form factor fits Supermicro X13SAW-TLN4F slot requirements
  • Major OEM chips from Samsung Micron Hynix tested for stability at rated settings

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What DDR5 speed and data rate does this 16GB kit run at?

The kit operates at DDR5 5600 with a PC5-44800 data rate, matching the Supermicro X13SAW-TLN4F memory controller specification.

Which physical slot and pin layout does this UDIMM kit require?

It uses the standard 288-pin DDR5 UDIMM form factor that the X13SAW-TLN4F motherboard expects; no ECC or registered modules will fit.

How do I install the two 8GB modules in the correct population order?

Consult the motherboard manual for the approved DIMM population sequence, then insert each module until the retention clips click securely on both ends.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.