我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green circuit boards with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR5 5600 CL46 1Rx8 1.1V UDIMM Supermicro X13SAW-TLN4F memory upgrade

SKU CH-E0WZ-ZKZH8

16 GB dual-channel DDR5 kit (2 × 8 GB) rated at 5600 MHz, CL46, 1.1 V, 288-pin UDIMM, validated for the Supermicro X13SAW-TLN4F motherboard

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB 2X8GB

  • 16 GB kit adds capacity for multitasking with two 8 GB modules
  • DDR5 5600 speed matches board specification for rated performance
  • CL46 latency and 1.10 V voltage align with memory controller expectations
  • 1Rx8 unbuffered UDIMM form factor fits Supermicro X13SAW-TLN4F slot requirements
  • Major OEM chips from Samsung Micron Hynix tested for stability at rated settings

Exact-fit DDR5 upgrade

This 16 GB kit (2 x 8 GB) is built for the Supermicro X13SAW-TLN4F motherboard. It delivers DDR5-5600 (PC5-44800) speed at 1.1 V with CL46 timing. The 1Rx8 rank and unbuffered, non-ECC design match the board's memory controller exactly.

Plain 288-pin UDIMM modules

The sticks use standard 288-pin DDR5 UDIMM connectors and have no heat spreader, so they fit tight DIMM slots without clearance issues. Major OEM chips from Samsung, Micron or Hynix are tested at rated voltage and timing for stable daily operation. No ECC or registered circuitry means they install like ordinary desktop memory.

1Rx8 rank at 1.1 V

The single-rank-per-module layout at 1.1 V is the specification that decides compatibility. If your board requires a different rank structure or voltage, this kit will not be recognised at full capacity or speed. Check the motherboard manual for approved DIMM population order before buying.

商品特色

  • 16 GB kit adds capacity for multitasking with two 8 GB modules
  • DDR5 5600 speed matches board specification for rated performance
  • CL46 latency and 1.10 V voltage align with memory controller expectations
  • 1Rx8 unbuffered UDIMM form factor fits Supermicro X13SAW-TLN4F slot requirements
  • Major OEM chips from Samsung Micron Hynix tested for stability at rated settings

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What DDR5 speed and data rate does this 16GB kit run at?

The kit operates at DDR5 5600 with a PC5-44800 data rate, matching the Supermicro X13SAW-TLN4F memory controller specification.

Which physical slot and pin layout does this UDIMM kit require?

It uses the standard 288-pin DDR5 UDIMM form factor that the X13SAW-TLN4F motherboard expects; no ECC or registered modules will fit.

How do I install the two 8GB modules in the correct population order?

Consult the motherboard manual for the approved DIMM population sequence, then insert each module until the retention clips click securely on both ends.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。