Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 48GB DDR5 5600MHz CL46 2Rx8 ECC Registered RDIMM memory upgrade

SKU CH-RR8H-FFRCM

48 GB DDR5 ECC registered RDIMM running at 5600 MHz with CL46 latency for GIGABYTE MS34-CP0 servers

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 48GB

Näytä 18 muuta kokoonpanoa
  • 48 GB capacity lets servers run larger workloads without swapping
  • DDR5 5600 speed delivers high bandwidth for data-intensive applications
  • ECC registered design detects and corrects single-bit errors automatically
  • 2Rx8 organisation and 1.1 V voltage match the GIGABYTE MS34-CP0 memory controller exactly
  • 288-pin RDIMM form factor fits the required server motherboard slots

Exact-match DDR5-5600 registered ECC module

This 48GB DDR5 5600MHz PC5-44800 RDIMM delivers CL46 latency at 1.1V in a 2Rx8 registered configuration. It is built for servers and workstations that require error-correcting memory and the electrical buffering of registered DIMMs to run fully populated at rated speed. The 288-pin form factor fits only DDR5 RDIMM slots.

Verified fitment for GIGABYTE MS34-CP0

The module is validated for the GIGABYTE MS34-CP0 motherboard, matching the board's required rank, voltage and timing so the firmware recognises the full 48GB capacity at DDR5-5600. Registered architecture offloads the memory controller, allowing every supported slot to operate at full load without signal degradation, while on-die ECC corrects single-bit errors before they reach the operating system.

DDR5 RDIMM population rules apply

Server memory controllers enforce strict population order and maximum capacity per channel that differ by platform; the manual for your specific motherboard defines which slots must be filled first and the total memory limit. Registered DIMMs cannot be mixed with unbuffered UDIMMs or SODIMMs, and the 288-pin keying prevents installation in any other DDR generation slot. Buyers needing higher density per module or non-ECC memory should select a different part.

Kohokohdat

  • 48 GB capacity lets servers run larger workloads without swapping
  • DDR5 5600 speed delivers high bandwidth for data-intensive applications
  • ECC registered design detects and corrects single-bit errors automatically
  • 2Rx8 organisation and 1.1 V voltage match the GIGABYTE MS34-CP0 memory controller exactly
  • 288-pin RDIMM form factor fits the required server motherboard slots

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 2Rx8 rank layout of this 48GB module require any specific population order on the GIGABYTE MS34-CP0 motherboard?

Yes, the motherboard manual defines the approved DIMM population order for registered ECC modules; follow that sequence so the memory controller recognises the full 48GB capacity at DDR5 5600 speed.

What thermal limit appears first when this registered ECC RDIMM runs continuously at 5600MHz?

The module has no heat spreader, so the DRAM junction temperature reaches its throttle point before the 1.10V power envelope becomes the limiting factor.

How much heat does the 1.10V CL46 RDIMM produce inside a fully populated server chassis?

At 1.10V the stick dissipates only its rated DDR5 5600 power budget, and because it is a registered ECC module without a heat spreader, airflow across the bare PCB keeps temperatures in the normal server operating range.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.