Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 768GB (6×128GB) DDR5-5600 CL46 ECC Registered RDIMM memory upgrade for Supermicro H14DSG-O-CPU

SKU CH-BFDA-23ETP

Six 128 GB DDR5-5600 CL46 registered ECC RDIMMs add 768 GB of error-correcting capacity to the Supermicro H14DSG-O-CPU motherboard

  • Capacity768GB (6 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 768 GB capacity across six 128 GB modules scales memory-intensive workloads
  • DDR5-5600 speed at CL46 latency delivers rated throughput for the platform
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-O-CPU memory slots precisely

Server-grade DDR5 ECC RDIMM kit for Supermicro

This 768GB kit contains six 128GB DDR5-5600 registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DSG-O-CPU memory controller expects. It targets administrators who need maximum supported capacity in every slot for virtualization, database or compute workloads.

DDR5-5600 registered interface limits

The DDR5-5600 (PC5-44800) standard delivers 5600 MT/s at 1.1V with CL46 latency, but full-speed operation requires the motherboard to support 2Rx4 registered DIMMs in a six-module population. If the board's qualified-vendor list restricts maximum capacity per slot or total channels, the kit will down-clock or fail to post.

768GB total capacity across six registered DIMMs

The single specification that decides fitment is the 768GB (6×128GB) 2Rx4 registered ECC configuration; the Supermicro H14DSG-O-CPU must explicitly support this exact population and capacity in its memory-reference guide, otherwise the system will not recognise the full amount or will not boot.

Kohokohdat

  • 768 GB capacity across six 128 GB modules scales memory-intensive workloads
  • DDR5-5600 speed at CL46 latency delivers rated throughput for the platform
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-O-CPU memory slots precisely

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K6
Capacity768GB (6 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 6X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I choose the 768GB 6×128GB kit or a different capacity for the Supermicro H14DSG-O-CPU?

The 768GB kit uses six 128GB DDR5-5600 RDIMMs at 1.1V with CL46 timing. It matches the board's required 2Rx4 rank, registered ECC design and 288-pin form factor so the memory controller recognises full capacity at rated speed.

What does the DDR5-5600 CL46 rating deliver once installed in the server?

The modules run at 5600 MT/s with a CAS latency of 46 cycles at 1.1V. Registered buffering offloads the memory controller, allowing all six slots to operate fully populated while ECC corrects single-bit errors on the fly to prevent silent data corruption.

How does the PC5-44800 DDR5 interface limit real-world throughput?

The PC5-44800 designation means a peak transfer rate of 44800 MB/s per module. With six 2Rx4 RDIMMs the memory controller can sustain near-peak bandwidth across all channels, capped by the DDR5-5600 clock and the board's population rules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.