Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 512GB 16x32GB 5600 CL46 ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-V7PP-2ZR2E

A 512GB DDR5-5600 registered ECC memory kit with sixteen 32GB modules at CL46 and 1.1V, validated for the Supermicro H14DST-F motherboard

  • Capacity512GB (16 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 512GB 16X32GB

Näytä 30 muuta kokoonpanoa
  • 512 GB total capacity from sixteen 32 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency and 1.1 V operation matching controller specs
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 288-pin 2Rx8 form factor verified for Supermicro H14DST-F motherboard population rules
  • Lifetime replacement warranty with US-based technical support included

512GB DDR5 RDIMM kit for Supermicro H14DST-F

This 512GB kit contains sixteen 32GB DDR5 registered DIMMs rated at 5600MHz PC5-44800 with CL46 latency. Each module operates at 1.1V using a 2Rx8 organisation and provides ECC error correction. The registered architecture is required by the Supermicro H14DST-F motherboard and allows all sixteen slots to be populated at full rated capacity.

288-pin registered form factor with major OEM chips

Modules use 288-pin RDIMM packaging without heat spreaders, matching the board's physical and electrical requirements. Chips are sourced from major OEM suppliers including Samsung, Micron and Hynix. The registered design buffers address and command signals so the memory controller remains stable when every slot is filled, while on-die ECC corrects single-bit errors before they affect workloads.

DDR5-5600 registered ECC limits and population rules

The kit runs at the standard DDR5-5600 data rate with CL46 timing; faster speeds or lower latencies are not supported by this specification. Full 512GB capacity depends on the motherboard's qualified vendor list and documented population order. Builders must verify the system manual for approved DIMM configurations before installation.

Kohokohdat

  • 512 GB total capacity from sixteen 32 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency and 1.1 V operation matching controller specs
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 288-pin 2Rx8 form factor verified for Supermicro H14DST-F motherboard population rules
  • Lifetime replacement warranty with US-based technical support included

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K16
Capacity512GB (16 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 16X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What DDR5 speed and PC5 bandwidth does this 16-module kit run at?

The kit operates at DDR5 5600 with a PC5-44800 data rate, so every module transfers at the rated 5600 MT/s when the motherboard enables the standard profile.

What physical slot type and pin count does the Supermicro H14DST-F require for these modules?

The board uses 288-pin DDR5 RDIMM slots; each module in this kit is a 288-pin Registered DIMM that matches that exact socket.

In what order should the 16 RDIMMs be populated on the H14DST-F to avoid a no-post condition?

Follow the motherboard manual's population sequence — typically filling the farthest slot from each CPU first, then working inward per channel — so all 16 registered modules are recognised at full 512GB capacity.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.