Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Twelve green DDR5 RDIMM modules in a row, no heat spreaders, 288 gold pins each

NEMIX RAM

NEMIX RAM DDR5 5600 768GB 12x64GB ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-CV01-HPF18

A 768 GB DDR5 ECC RDIMM kit of twelve 64 GB modules running at 5600 MT/s with CL46 latency, registered buffering and 1.1 V operation, validated for the Supermicro H14DST-F motherboard

  • Capacity768GB (12 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 768GB 12X64GB

Näytä 30 muuta kokoonpanoa
  • 768 GB total capacity from 12 matched 64 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on every populated slot
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller for full-capacity stability
  • 10 V operation at 2Rx4 rank matches the Supermicro H14DST-F memory controller expectations exactly
  • 288-pin RDIMM form factor verified for the H14DST-F motherboard population rules

Exact-match DDR5-5600 kit for Supermicro H14DST-F

This 768GB kit contains twelve 64GB registered ECC RDIMMs built to the DDR5-5600 (PC5-44800) standard at 1.1V with CL46 timing. It targets administrators who need to fully populate a Supermicro H14DST-F motherboard with validated modules that the memory controller recognises at rated speed and capacity.

Installation follows the board's population rules

Each module is a 288-pin registered DIMM; the board requires RDIMMs, not UDIMMs or SODIMMs. The kit matches the exact rank, voltage and timing the controller expects, so recognition at full capacity is typical when the approved population order from the system manual is followed. Errors usually come from mixing ranks or skipping the documented slot sequence.

768GB total capacity across twelve slots

The configuration delivers maximum registered-ECC density for virtualisation, large databases and in-memory analytics workloads. Headroom ends when all twelve slots are filled; any further expansion needs a platform with more memory channels or higher-capacity DIMMs that the motherboard qualifies.

Kohokohdat

  • 768 GB total capacity from 12 matched 64 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on every populated slot
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller for full-capacity stability
  • 10 V operation at 2Rx4 rank matches the Supermicro H14DST-F memory controller expectations exactly
  • 288-pin RDIMM form factor verified for the H14DST-F motherboard population rules

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K12
Capacity768GB (12 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 12X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I verify the 768GB kit is running at DDR5 5600 with CL46 after installing it in my Supermicro H14DST-F?

Enter the BIOS on first boot and confirm the memory speed shows 5600 MT/s, CAS latency reads CL46, voltage is set to 1.10V, and all 12 modules appear as 64GB 2Rx4 Registered ECC RDIMMs.

What comes in the box and do I need anything else to populate all 12 slots on the H14DST-F?

The kit includes 12 NEMIX RAM 64GB DDR5 5600 2Rx4 Registered ECC RDIMMs (part MR44800-924K12). No extra modules or cables are required; install them following the motherboard population guide.

Should I choose the 12 x 64GB kit or a different capacity for the H14DST-F?

The 768GB 12 x 64GB kit matches the board's DDR5 5600 2Rx4 Registered ECC spec exactly. Select this kit when you need the maximum supported capacity across all 12 DIMM slots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.