Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 RDIMM modules with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 256GB (4×64GB) CL46 1.1V 2Rx4 Supermicro H14DSH memory upgrade

SKU CH-298Y-VMH5T

256 GB DDR5 ECC RDIMM kit with four 64 GB modules running at 5600 MHz CL46 for the Supermicro H14DSH motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

Näytä 30 muuta kokoonpanoa
  • 256 GB total capacity from four 64 GB modules
  • DDR5 5600 speed with PC5-44800 bandwidth for server workloads
  • ECC and registered design corrects errors and stabilises full-slot populations
  • CL46 latency at 1.1 V matches controller expectations
  • 288-pin RDIMM form factor verified for Supermicro H14DSH motherboard

Precision upgrade for Supermicro H14DSH

This 256GB kit delivers four 64GB DDR5 5600 RDIMM modules built to the exact rank, voltage and timing the H14DSH memory controller expects. Registered ECC architecture ensures full-capacity recognition across all populated slots without down-clocking. It targets administrators who need guaranteed compatibility rather than trial-and-error qualification.

Thermals power and acoustics

Operating at 1.10V with no heat spreader, the modules rely on chassis airflow for cooling and add negligible acoustic load. Registered buffering reduces electrical load on the memory controller, helping keep system power draw predictable during normal operation. The low-voltage DDR5 design supports dense population without exceeding typical server thermal envelopes.

Sustained load behavior

Under continuous workloads the Registered ECC design maintains signal integrity across all 288 pins while correcting single-bit errors on the fly. CL46 latency and 2Rx4 organisation remain stable when every slot is filled, preventing the silent data corruption that can trigger unplanned reboots. The kit is validated for full-capacity, full-speed operation in the specified platform.

Kohokohdat

  • 256 GB total capacity from four 64 GB modules
  • DDR5 5600 speed with PC5-44800 bandwidth for server workloads
  • ECC and registered design corrects errors and stabilises full-slot populations
  • CL46 latency at 1.1 V matches controller expectations
  • 288-pin RDIMM form factor verified for Supermicro H14DSH motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the 288-pin DDR5 RDIMM modules in the Supermicro H14DSH, and which step is commonly missed?

Power down and unplug the server. Open the chassis, locate the DIMM slots, and follow the motherboard manual’s exact population sequence for the 4×64 GB kit. The step most often missed is verifying the prescribed slot order so all 256 GB are recognized at DDR5-5600.

What maintenance or replacement will the 2Rx4 registered ECC RDIMMs need over time?

The modules have no moving parts and require no scheduled maintenance. ECC corrects single-bit errors automatically. Replace a module only if the system logs uncorrectable errors or a DIMM fails POST, at which point the lifetime replacement warranty covers a swap.

What limit appears first when the 1.1 V CL46 kit runs sustained workloads on the H14DSH?

The registered buffer and ECC logic keep electrical loading stable across all four slots, so the first bound you hit is the DDR5-5600 data rate and CL46 timing ceiling defined by the memory controller — not thermals, as the modules ship without heat spreaders.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.