Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Twelve green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600MHz 1.1TB (12x96GB) ECC Registered RDIMM Supermicro H13DSH memory upgrade

SKU CH-YCE5-VWD70

1.1 TB kit of twelve 96 GB DDR5-5600 Registered ECC RDIMMs at CL46 and 1.10 V for Supermicro H13DSH servers

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

Näytä 30 muuta kokoonpanoa
  • Massive 1.1 TB capacity across 12 modules for memory-hungry workloads
  • DDR5-5600 speed with CL46 latency for high-throughput server tasks
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 2Rx4 organisation at 1.1 V matches the Supermicro H13DSH memory controller exactly
  • 288-pin RDIMM form factor fits the board's required slot type without adapters

1.1 TB DDR5 RDIMM kit for Supermicro H13DSH

This 1.1 TB kit contains twelve 96 GB DDR5 registered DIMMs rated at 5600 MHz PC5-44800 with CL46 latency and 1.10 V operation. The 2Rx4 ECC registered modules are built to match the Supermicro H13DSH motherboard memory population rules so the full capacity is recognised at rated speed.

Sustained enterprise workloads

Registered buffering offloads the memory controller allowing every slot to run fully populated at full capacity without downclocking. ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots during long-running compute or database tasks.

Thermals noise and power draw

Modules operate at the standard DDR5 1.10 V with no heat spreader installed relying on chassis airflow for cooling. Power draw scales with the twelve-module population so adequate system airflow is required to maintain stable temperatures under continuous load.

Kohokohdat

  • Massive 1.1 TB capacity across 12 modules for memory-hungry workloads
  • DDR5-5600 speed with CL46 latency for high-throughput server tasks
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 2Rx4 organisation at 1.1 V matches the Supermicro H13DSH memory controller exactly
  • 288-pin RDIMM form factor fits the board's required slot type without adapters

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much heat and power does the 1.10 V DDR5 5600 kit draw when the Supermicro H13DSH runs fully populated all day?

Each 96 GB RDIMM operates at 1.10 V with no heat spreader; total power scales with all 12 modules installed, so airflow across the 288-pin slots must handle the combined load of a fully populated 1.1 TB configuration.

What motherboard and firmware must I already have for this 12×96 GB RDIMM kit to be recognised at full capacity?

A Supermicro H13DSH motherboard with BIOS that supports DDR5 5600 Registered ECC 2Rx4 modules and the board's documented DIMM population order for 12 slots.

Will the CL46 2Rx4 Registered ECC modules work alongside any existing DDR5 RDIMMs I keep in the same H13DSH?

Mixed-rank or mixed-timing DDR5 RDIMMs can prevent full-speed operation; the board's memory controller expects identical 2Rx4 CL46 Registered ECC modules in every populated slot for stable 5600 MT/s performance.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.