Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 576GB (6×96GB) 5600MHz CL46 ECC RDIMM memory upgrade for Supermicro H14DSH

SKU CH-Z4DG-NVKMX

A 576 GB DDR5 registered ECC kit of six 96 GB modules at 5600 MHz CL46, validated for the Supermicro H14DSH motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Näytä 30 muuta kokoonpanoa
  • 576 GB total capacity from six 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth without downclocking
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors in real time
  • 1 V operation at 2Rx4 rank matches the motherboard's voltage and population rules
  • 288-pin RDIMM form factor is the exact fitment the Supermicro H14DSH requires

576 GB DDR5 5600 RDIMM kit

This 576 GB kit contains six 96 GB DDR5 5600 (PC5-44800) registered ECC RDIMMs built to 1.1 V and CL46 timings. The modules use a 2Rx4 organisation and 288-pin form factor required by the Supermicro H14DSH motherboard. They arrive new and ready for server installation.

For full-capacity registered ECC servers

The kit suits administrators who need maximum registered ECC capacity on a board that accepts six 96 GB RDIMMs at DDR5 5600. Builders requiring unbuffered UDIMMs, SODIMM form factors, lower voltages, non-ECC operation, or smaller module densities should choose different memory.

Registered 2Rx4 ECC at 1.1 V

Registered (buffered) architecture with ECC and 2Rx4 ranking offloads the memory controller so every slot runs fully populated at the rated speed while correcting single-bit errors on the fly. This specification decides whether the kit matches your platform's population rules and stability requirements.

Kohokohdat

  • 576 GB total capacity from six 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth without downclocking
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors in real time
  • 1 V operation at 2Rx4 rank matches the motherboard's voltage and population rules
  • 288-pin RDIMM form factor is the exact fitment the Supermicro H14DSH requires

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 1.10 V operating voltage keep the 96 GB RDIMMs cool when the Supermicro H14DSH runs all day?

The kit runs at the standard DDR5 1.10 V level, so power draw per module stays within the platform's thermal budget even with six 96 GB sticks fully populated.

What must the motherboard provide for this 6×96 GB kit to be recognised at full capacity?

The board needs 288-pin DDR5 RDIMM slots, support for 2Rx4 registered ECC modules, and a memory controller that accepts 5600 MT/s at CL46 with 1.10 V.

Can the 5600 MHz CL46 registered ECC modules share channels with slower DDR5 DIMMs already in the H14DSH?

The server will clock every installed DIMM to the lowest common speed and latency, so mixing these 5600 MT/s CL46 sticks with slower modules reduces the kit to the slower kit's timings.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.