Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 60mm square cooling fan with 3-pin connector

OEM Industries

OEM Industries AD0612LX-A73GL 60mm CPU cooler 12V 0.08A 2500 RPM

SKU CH-F6K3-DQVKA MPN AD0612LX-A73GL

A 60 mm hydraulic-bearing fan running at 2500 RPM with a 3-pin 12 V connector, rated for 50000 hours

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeHydraulic
  • Power Connector3 Wires
  • LEDNo
  • Hydraulic bearing extends fan lifespan to 50000 hours
  • 2500 RPM airflow cools CPU efficiently
  • 12V 0.08A power draw keeps energy use low
  • 60mm compact size fits tight build spaces
  • Three-wire connector enables speed monitoring and control

Compact 60 mm CPU fan for tight builds

The AD0612LX-A73GL is a 60 mm square fan rated at 12 V and 0.08 A, spinning at 2500 RPM with a hydraulic bearing. It uses a three-wire connector for speed reporting and draws minimal power. The unit is sold as a fan only, without heatsink or mounting hardware.

Suited for legacy or small-form-factor systems

Builders repairing OEM chassis, 1U servers or compact industrial boards where a 6025 footprint is mandatory will find this a direct replacement. Systems that require PWM control, higher static pressure or a larger frame should look elsewhere.

Three-wire 12 V connector decides fit

The 3-pin header provides tachometer feedback but no PWM duty-cycle input, so motherboard fan curves are limited to voltage regulation. Verify that the target board supplies a 12 V three-pin header before ordering.

Kohokohdat

  • Hydraulic bearing extends fan lifespan to 50000 hours
  • 2500 RPM airflow cools CPU efficiently
  • 12V 0.08A power draw keeps energy use low
  • 60mm compact size fits tight build spaces
  • Three-wire connector enables speed monitoring and control

Tekniset tiedot

ModelAD0612LX-A73GL
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeHydraulic
Power Connector3 Wires
LEDNo

Kysymyksiä tästä tuotteesta

How do I mount the 60mm fan and what orientation mistake should I avoid?

Align the four corner screw holes with your heatsink or case mount, then secure with 60mm-spaced screws; the step often missed is confirming airflow direction — the label side is intake, so point it toward the heatsink fins, not away.

What part will wear out first and when should I plan a replacement?

The hypro alloy bearing is rated for 50000 hours of continuous running; after that interval the bearing is the component most likely to need replacement.

At sustained load what limit appears first — noise, vibration or thermal throttling?

At the rated 2500 RPM the fan moves a fixed air volume; if the heatsink cannot dissipate the CPU heat at that airflow, thermal throttling becomes the first limit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.