OEM Industries
OEM Industries AD0612LX-A73GL 60mm CPU cooler 12V 0.08A 2500 RPM
A 60 mm hydraulic-bearing fan running at 2500 RPM with a 3-pin 12 V connector, rated for 50000 hours
- ColorBlack
- TypeFan only
- Fan Size60mm
- Bearing TypeHydraulic
- Power Connector3 Wires
- LEDNo
- Hydraulic bearing extends fan lifespan to 50000 hours
- 2500 RPM airflow cools CPU efficiently
- 12V 0.08A power draw keeps energy use low
- 60mm compact size fits tight build spaces
- Three-wire connector enables speed monitoring and control
Compact 60 mm CPU fan for tight builds
The AD0612LX-A73GL is a 60 mm square fan rated at 12 V and 0.08 A, spinning at 2500 RPM with a hydraulic bearing. It uses a three-wire connector for speed reporting and draws minimal power. The unit is sold as a fan only, without heatsink or mounting hardware.
Suited for legacy or small-form-factor systems
Builders repairing OEM chassis, 1U servers or compact industrial boards where a 6025 footprint is mandatory will find this a direct replacement. Systems that require PWM control, higher static pressure or a larger frame should look elsewhere.
Three-wire 12 V connector decides fit
The 3-pin header provides tachometer feedback but no PWM duty-cycle input, so motherboard fan curves are limited to voltage regulation. Verify that the target board supplies a 12 V three-pin header before ordering.
Najważniejsze cechy
- Hydraulic bearing extends fan lifespan to 50000 hours
- 2500 RPM airflow cools CPU efficiently
- 12V 0.08A power draw keeps energy use low
- 60mm compact size fits tight build spaces
- Three-wire connector enables speed monitoring and control
Specyfikacja
| Model | AD0612LX-A73GL |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 60mm |
| Bearing Type | Hydraulic |
| Power Connector | 3 Wires |
| LED | No |
Pytania dotyczące tego produktu
How do I mount the 60mm fan and what orientation mistake should I avoid?
Align the four corner screw holes with your heatsink or case mount, then secure with 60mm-spaced screws; the step often missed is confirming airflow direction — the label side is intake, so point it toward the heatsink fins, not away.
What part will wear out first and when should I plan a replacement?
The hypro alloy bearing is rated for 50000 hours of continuous running; after that interval the bearing is the component most likely to need replacement.
At sustained load what limit appears first — noise, vibration or thermal throttling?
At the rated 2500 RPM the fan moves a fixed air volume; if the heatsink cannot dissipate the CPU heat at that airflow, thermal throttling becomes the first limit.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001051BTC
Dostępny