نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 60mm square cooling fan with 3-pin connector

OEM Industries

OEM Industries AD0612LX-A73GL 60mm CPU cooler 12V 0.08A 2500 RPM

SKU CH-F6K3-DQVKA MPN AD0612LX-A73GL

A 60 mm hydraulic-bearing fan running at 2500 RPM with a 3-pin 12 V connector, rated for 50000 hours

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeHydraulic
  • Power Connector3 Wires
  • LEDNo
  • Hydraulic bearing extends fan lifespan to 50000 hours
  • 2500 RPM airflow cools CPU efficiently
  • 12V 0.08A power draw keeps energy use low
  • 60mm compact size fits tight build spaces
  • Three-wire connector enables speed monitoring and control

Compact 60 mm CPU fan for tight builds

The AD0612LX-A73GL is a 60 mm square fan rated at 12 V and 0.08 A, spinning at 2500 RPM with a hydraulic bearing. It uses a three-wire connector for speed reporting and draws minimal power. The unit is sold as a fan only, without heatsink or mounting hardware.

Suited for legacy or small-form-factor systems

Builders repairing OEM chassis, 1U servers or compact industrial boards where a 6025 footprint is mandatory will find this a direct replacement. Systems that require PWM control, higher static pressure or a larger frame should look elsewhere.

Three-wire 12 V connector decides fit

The 3-pin header provides tachometer feedback but no PWM duty-cycle input, so motherboard fan curves are limited to voltage regulation. Verify that the target board supplies a 12 V three-pin header before ordering.

أبرز المميزات

  • Hydraulic bearing extends fan lifespan to 50000 hours
  • 2500 RPM airflow cools CPU efficiently
  • 12V 0.08A power draw keeps energy use low
  • 60mm compact size fits tight build spaces
  • Three-wire connector enables speed monitoring and control

المواصفات

ModelAD0612LX-A73GL
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeHydraulic
Power Connector3 Wires
LEDNo

أسئلة حول هذا المنتج

How do I mount the 60mm fan and what orientation mistake should I avoid?

Align the four corner screw holes with your heatsink or case mount, then secure with 60mm-spaced screws; the step often missed is confirming airflow direction — the label side is intake, so point it toward the heatsink fins, not away.

What part will wear out first and when should I plan a replacement?

The hypro alloy bearing is rated for 50000 hours of continuous running; after that interval the bearing is the component most likely to need replacement.

At sustained load what limit appears first — noise, vibration or thermal throttling?

At the rated 2500 RPM the fan moves a fixed air volume; if the heatsink cannot dissipate the CPU heat at that airflow, thermal throttling becomes the first limit.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.