OWC 3L2D44R4256P 256GB (2x128GB) DDR4 3200 CL22 4Rx4 LRDIMM ECC 1.2V
- 256GB (2 x 128GB)
- 288-Pin DDR4 ECC LR…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
Single 256 GB DDR4 3200 CL22 8Rx4 ECC load-reduced LRDIMM for HP ProLiant DL385 Gen10 Plus, DL385 Gen10 Plus v2, DX360 Gen10 Plus and DX385 Gen10 Plus servers
This 256GB DDR4 LRDIMM operates at 3200MHz with CL22 latency and 1.2V power draw. It targets administrators upgrading HP ProLiant DL385 Gen10 Plus, DL385 Gen10 Plus v2, DX360 Gen10 Plus or DX385 Gen10 Plus systems. The module uses an 8Rx4 organisation and 288-pin form factor. It is not compatible with standard desktop computers or with unbuffered and registered ECC memory types.
Load-reduced architecture reduces electrical load on the memory bus, allowing the single 256GB module to maintain stability during extended multi-threaded tasks. The DDR4 PC4-25600 rating supports continuous throughput at 3200MHz, while backward compatibility lets the DIMM run at 2133MHz, 2400MHz, 2666MHz or 2933MHz when the platform requires it. ECC correction operates continuously to protect data integrity under heavy utilisation.
Operating at 1.2V keeps power draw low for a high-capacity server DIMM, reducing the thermal contribution inside dense chassis. The module produces no audible noise because it has no moving parts. JEDEC and RoHS compliance ensure consistent electrical characteristics across the operating temperature range defined by the host server platform.
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The module operates at 1.2V DDR4 voltage; actual sustained power draw depends on the platform's memory controller and workload, which the platform firmware manages.
The server must accept DDR4 ECC Load Reduced memory in 288-pin slots and cannot mix this module with unbuffered or registered ECC DIMMs.
Yes, it is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz speeds; the memory controller will negotiate the lowest common speed across populated slots.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?